09-12-2020, 06:02 PM | #1 |
Hood release latch
Has anyone broke there hood latch lever on the insid3 to release the latch,I was in a hurry not sure why,but went and pulled the plastic handle to pop the hood when I did,I heard a piece of Plastic fly across the car,and the latch just kind of fell a few inches,put it back in place,and found the plastic that broke off,not sure how long it will last like this,so will have to buy a new one.
|
|
09-14-2020, 12:56 PM | #2 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,736
|
Dealer is best for those pieces and it might not even be expensive.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
09-14-2020, 06:38 PM | #3 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
I have gotten pretty lucky on dealer prices for parts like that.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
09-14-2020, 07:18 PM | #4 |
Thanks,I will try them.
|
|
|
|
|
|