04-01-2019, 10:06 AM | #1 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
My Best Whipple 1/4 Mile Pass Yet
I posted this in the 1/4 mile forum, but since this is directly tied to Whipple and supercharging, figured i would post it here as well.
Finally made it to the track this past Saturday 03/30/18. RPM out of Wilmington DE had a late model shootout at Cecil County in MD. My previous PB on street tires was 1.738 60ft, 10.871 @ 128.93. Since then I have added 2" kooks, RF big gulp & NW103, retuned at CSP which it made 653/618. Also this was the first time out on my drag pack: Front Wheels: Race Star 92's 17x4.50 5x120BC 1.75"BS GLOSS BLACK Tires: M/T ET FRONT 27.5/4.0-17 Rear Wheels: Race Star 92's 17x10.5 5x120BC 7" BS GLOSS BLACK Tires: M/T ET STREET R BIAS 28x11.5-17. This is my first experience on DR's with a manual with this much HP. I was really happy to improve, although I was hoping for better. I need some more practice to get the 60ft down. The MPH is there for a 10.50 pass, just need to cut .1 from that 60ft and I should be there. I was probably the slowest car in the class, and in the final 4 I was taken out by a 9.50 CTSV from RPM with a maggie and NOS. But it was so much fun to be at the track on a beautiful day making passes. Best Pass to date: 10.705 @ 131.92mph
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
04-01-2019, 10:20 AM | #2 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
Great pass! Hooray for us M6 guys!!!!! Any secrets you can pass a long on the launch technique?
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
04-01-2019, 10:59 AM | #3 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
From what i have experienced the DR's help in obvious ways, but it was so nice to just let it eat and not have to worry about blowing the tires off and catastrophic wheel hop. The MT ET Street R Bias Plys at 16 PSI held up to everything i gave them. Heated them up in 1st gear till i got some smoke, staged, brought the rpms up to around 3k, and smoothly and quickly gave it full throttle and letting the clutch out at the same time. Clutch held up fine so far, with about 24 supercharged passes on it. I am just going to keep giving it more RPM till the car tells me it does like it and see what happens. I figure eventually it will push thru the stock clutch.....the tires actually spun about 1" on the rim after Saturdays passes.
As for the RF big gulp, I had the standard RF for a SC application (sold it). And figured i would just do the big gulp with the NW103 TB. I figure there will be pistons, heads and cam in my future, so now i am all setup.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
04-01-2019, 12:46 PM | #4 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Ok, ty for the setup
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-01-2019, 06:13 PM | #5 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,320
|
looking good, M6 wow!
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
04-01-2019, 07:51 PM | #6 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,800
|
Nice pass for a full weight M6.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
04-01-2019, 11:24 PM | #7 |
Tactical Garage
Drives: 2016 Camaro 2SS Join Date: Nov 2016
Location: Idaho
Posts: 427
|
Josh, Heck of a pass. I think you will see that 10.5 with a little more track time. Local track is opening soon here so hoping to post up some improved times as well.
|
04-02-2019, 05:10 AM | #8 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Go get'em steelheadrob!!! You should def see some improved times as well. Hope to hit my local track Friday night of the weather holds.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
04-02-2019, 05:12 AM | #9 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Thanks guys! Love this stuff, so much fun, always want 1 more pass haha.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
04-02-2019, 05:42 AM | #10 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,092
|
Very nice..congrats! I wish I had a local track. Ours just shut down.
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
04-04-2019, 01:09 AM | #11 |
Drives: 1SS Summit White 6 speed Join Date: Jul 2017
Location: Gainesville GA
Posts: 579
|
Awesome
__________________
16 1SS M6 White
Magnuson 2.3 Heartbeat Roto Fab Solo Performance Cat deletes and Axleback Hurst short shifter #'s coming soon Riaction coilovers 1LE sway bars BMR mm BMR chassis brace Flow one 19" wheels wrapped in Mickey Thompsons 02 Z28 M6 35th anniversary 80k miles T-tops Leather Bolt ons Joy to drive this classic every day! Daily Driver |
|
|
Post Reply
|
|
|