05-03-2014, 08:58 PM | #1 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Stock manifolds and air intake
Gauging interest for these parts, ill soon be removing these off my 2010 2SS woth less than 9k miles on them. I also have the stock maf sensor for the intake since it's a "weak" one and I'm upgrading to the tuned version vararam. Not sure on the stock cat back at this point, but if I did decide to sell I'd prefer local pick up I'm located in central Arkansas.
|
05-03-2014, 09:10 PM | #2 |
Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011
Location: East Bay
Posts: 2,189
|
Would be interested in both manifolds and air intake (but not MAF).
Are you including cats? |
05-03-2014, 09:21 PM | #3 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Cats would stay with the cat back correct? Don't want to hack up the exhaust
|
05-04-2014, 01:49 AM | #4 |
Drives: 2017 1SS 1LE - Hyper Blue, P85DL Join Date: Jul 2011
Location: East Bay
Posts: 2,189
|
You mentioned manifolds, which indicates that you are going with long tubes. Typically people replace the cats at the same time. Are you doing long tubes and a cat back while keeping the stock cats?
|
05-04-2014, 07:52 AM | #5 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Here's the deal, my cousin currently has full kooks exhaust and headers on her car, but she's sponsored by magnaflow and currently has a magnaflow cat back she took off her other pace car she sold to put on this camaro she has now. So she's waiting to hear back from magnaflow to see about them comping her a set or their headers since her car is going to be trailered around with them to shows. So depending on whether or not she gets magnaflow to comp her headers is dependant on if I remove the manifolds
|
05-04-2014, 07:59 AM | #6 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Just looked at the stock exhaust and I didn't realize the cats bolted up to the manifolds and had slip fit connectors to the exhaust portion so yes I could ship the cats
|
05-07-2014, 01:43 PM | #7 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
|
05-07-2014, 02:18 PM | #8 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
|
05-08-2014, 12:30 PM | #9 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Bumps
|
05-14-2014, 06:33 AM | #10 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Bumps
|
05-30-2014, 07:38 PM | #11 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Still have all this available
|
06-01-2014, 03:17 PM | #12 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
Sunday bump
|
06-01-2014, 05:55 PM | #13 |
Drives: 2016 2SS Camaro Join Date: Apr 2014
Location: Central Arkansas
Posts: 514
|
I'll be removing the large resonator as well if anybody would be interested in that, does anybody know if they're worth anything?
|
06-01-2014, 06:29 PM | #14 |
Drives: 2013 Camaro SS2/RS 1LE Rally Yellow Join Date: Aug 2013
Location: Miami
Posts: 313
|
|
|
|
|
|