C7 Carbon Fiber Parts coming soon from Lashway Motorsports

Erik@lashway · 10-15-2013, 10:15 PM

NEW for the C7! World's finest Carbon Fiber exterior parts exclusively for the Stringray Corvette!

We have developed custom one off parts for the C7 (all trim levels) out of 100% real Carbon Fiber. These parts are entirely made in the USA as well - and we're sticking to that. We partnered with a very reputable composites company for this project and the results are unreal.

The first PROTOTYPE to be released are a beautiful set of side skirts. We will have two style available shortly. The style you see below is what we call our "Race" skirts. There is more visible material, and less contour to the exterior lines of the vehicle. They feature a more aggressive profile.

The second version, which will have the designation of "Street" are more contoured to the exterior lines of the Stringray. They are a bit smaller in width, and less aggressive by design. They are absolutely beautiful and are ideal for someone looking to add just a touch of carbon on their vehicle without going to aggressive on the styling.

Pricing has not yet been determined as these are only prototypes. What you see in the following photos are a third of the overall quality that the production items will be. These were built to give you, the customer, and idea of the overall theme of these parts.

We also offer Kevlar products which allow us to build these identical parts in various colors and finishes - Red, Blue, Purple, Green, Yellow ETC.

Please contact us for more information. Once we have the prototypes dialed-in, we will begin to take pre-orders.

Once again, this is only the test piece. It is a mold that is laminated with real CF. The final production parts will be entirely made of CF, and will have a better finish than this.

GunnyG · 10-27-2013, 10:45 PM

Oh man...I'm losing blood to my head. Those look great, and would accent with my roof very well.

Erik@lashway · 10-28-2013, 10:33 AM

Gunny,

Thanks for the interest - I love the fact that these are generating a buzz.

Wait until the finished items are out!

Should have something this week.

Erik@Lashway

sahowley · 10-28-2013, 12:55 PM

I'm interested when you get pricing please let me know. You working on a front splitter also? I need to stop by and say hello to y'all. Are you in the shop on sat?
Thanks,
Stephen

Erik@lashway · 11-02-2013, 05:03 AM

All the final molds are done. We're also developing a rear bumper cover as well as carbon roofs which we'll offer on a core return basis. For those who opted out of the carbon roof option from GM, now is your chance!!!

Stay tuned.

Should have something this week.

Erik@Lashway

Erik@lashway · 11-02-2013, 05:06 AM

Quote:

Originally Posted by sahowley

I'm interested when you get pricing please let me know. You working on a front splitter also? I need to stop by and say hello to y'all. Are you in the shop on sat?
Thanks,
Stephen

Hi Stephen,

You are always welcome my friend. We will be at the shop this Sunday actually cleaning up, and making improvements to our new facility which we just moved into.

We have 2-3 C7's coming by actually for quotes and work, so please join.

Initially, we're going to offer the following package for the exterior of the vehicle:

Skirts (Race and Street)
Front Splitter
Carbon Roof
Carbon Rear Diffuser Panel

We'll offer these items individually, or as a kit.

Erik@Lashway

GunnyG · 11-02-2013, 01:15 PM

I would like the "Street" skirts, and front splitter…just have to make sure my piggie bank won't have to be busted.

Erik@lashway · 11-13-2013, 08:53 PM

Quote:

Originally Posted by GunnyG

I would like the "Street" skirts, and front splitter…just have to make sure my piggie bank won't have to be busted.

The parts are affordable for sure...not looking to gouge customers for no good reason. Just looking to build our business, product lines, and make people love their C7 even more!

Mods are done. Waiting for the production items to be completed so we can start selling.

Erik@Lashway

LIM3 · 11-14-2013, 10:21 PM

What company is doing the work ?

Erik@lashway · 11-15-2013, 07:22 PM

Quote:

Originally Posted by LIM3

What company is doing the work ?

We're working with G3 Composites for these unique items. They can only be purchased through authorized vendors, like us.

Erik

Erik@lashway · 11-21-2013, 11:15 PM

For those who have been waiting, the parts are just about ready. We're going to install the entire package we're offering on our C7, and will post a formal marketing campaign complete with pics, specs, pricing and other info!!!

Erik@lashway · 12-28-2013, 10:59 AM

Hey guys...sorry for the delay in response. We were closed for Christmas.

Anyway, by popular demand, here are some teaser shots of our ground effects in CARBON FLASH METALLIC! They fit and look the same as the Carbon Fiber items, but are identical to the CFM parts you already have on your vehicle in color and finish.

These shots were taken after the last layer of clear. They still need to be wetsanded and polished - but you get the idea.

I will post pricing and better photos once they are mounted on our C7!

Enjoy....

DocHolliday · 12-28-2013, 01:13 PM

I'm a definite buyer for these carbon flash pieces...look forward to pricing and shipping data.

Erik@lashway · 01-14-2014, 07:13 AM

Hey guys, I have something better...check out our short HOW TO/PROMOTIONAL video we put together last week. This shows how easy it is to install these parts. Parts featured in video are the CARBON FLASH METALLIC pieces...

Erik@Lashway

10-15-2013, 10:15 PM	#1
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	C7 Carbon Fiber Parts coming soon from Lashway Motorsports NEW for the C7! World's finest Carbon Fiber exterior parts exclusively for the Stringray Corvette! We have developed custom one off parts for the C7 (all trim levels) out of 100% real Carbon Fiber. These parts are entirely made in the USA as well - and we're sticking to that. We partnered with a very reputable composites company for this project and the results are unreal. The first PROTOTYPE to be released are a beautiful set of side skirts. We will have two style available shortly. The style you see below is what we call our "Race" skirts. There is more visible material, and less contour to the exterior lines of the vehicle. They feature a more aggressive profile. The second version, which will have the designation of "Street" are more contoured to the exterior lines of the Stringray. They are a bit smaller in width, and less aggressive by design. They are absolutely beautiful and are ideal for someone looking to add just a touch of carbon on their vehicle without going to aggressive on the styling. Pricing has not yet been determined as these are only prototypes. What you see in the following photos are a third of the overall quality that the production items will be. These were built to give you, the customer, and idea of the overall theme of these parts. We also offer Kevlar products which allow us to build these identical parts in various colors and finishes - Red, Blue, Purple, Green, Yellow ETC. Please contact us for more information. Once we have the prototypes dialed-in, we will begin to take pre-orders. Once again, this is only the test piece. It is a mold that is laminated with real CF. The final production parts will be entirely made of CF, and will have a better finish than this.

10-27-2013, 10:45 PM	#2
GunnyG Da WHALE Drives: 2014 Stingray, 2015 Panamera 4 Join Date: Dec 2011 Location: Oceanside, Ca - Originally from KCMO Posts: 8,878 View My Garage	Oh man...I'm losing blood to my head. Those look great, and would accent with my roof very well. __________________ Project MantaRay...Underway

11-02-2013, 01:15 PM	#7
GunnyG Da WHALE Drives: 2014 Stingray, 2015 Panamera 4 Join Date: Dec 2011 Location: Oceanside, Ca - Originally from KCMO Posts: 8,878 View My Garage	I would like the "Street" skirts, and front splitter…just have to make sure my piggie bank won't have to be busted. __________________ Project MantaRay...Underway

11-14-2013, 10:21 PM	#9
LIM3 it's mind bottling.. Drives: SGM Join Date: Apr 2011 Location: miami floirda. Posts: 5,393	What company is doing the work ? __________________

12-28-2013, 01:13 PM	#13
DocHolliday Drives: '14 Blade Silver Z51 Join Date: Jun 2009 Location: Northern Virginia Posts: 559	I'm a definite buyer for these carbon flash pieces...look forward to pricing and shipping data. __________________ Say When

10-28-2013, 10:33 AM	#3
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Gunny, Thanks for the interest - I love the fact that these are generating a buzz. Wait until the finished items are out! Should have something this week. Erik@Lashway

10-28-2013, 12:55 PM	#4
sahowley Drives: 2014 C7 Z51 Wht/Blck LT3 Auto Join Date: Oct 2013 Location: Royal Palm Beach, FL Posts: 63	I'm interested when you get pricing please let me know. You working on a front splitter also? I need to stop by and say hello to y'all. Are you in the shop on sat? Thanks, Stephen

11-02-2013, 05:03 AM	#5
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	All the final molds are done. We're also developing a rear bumper cover as well as carbon roofs which we'll offer on a core return basis. For those who opted out of the carbon roof option from GM, now is your chance!!! Stay tuned. Should have something this week. Erik@Lashway

11-21-2013, 11:15 PM	#11
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	For those who have been waiting, the parts are just about ready. We're going to install the entire package we're offering on our C7, and will post a formal marketing campaign complete with pics, specs, pricing and other info!!!

12-28-2013, 10:59 AM	#12
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Hey guys...sorry for the delay in response. We were closed for Christmas. Anyway, by popular demand, here are some teaser shots of our ground effects in CARBON FLASH METALLIC! They fit and look the same as the Carbon Fiber items, but are identical to the CFM parts you already have on your vehicle in color and finish. These shots were taken after the last layer of clear. They still need to be wetsanded and polished - but you get the idea. I will post pricing and better photos once they are mounted on our C7! Enjoy....