11-18-2019, 06:07 AM | #1 |
Drives: 2017 camaro ZL1 Join Date: Jul 2014
Location: south carolina
Posts: 84
|
Wheel setup
I’m thinking of putting some FR8 wheels on my 17 ZL1 I wanna go 20x10 n the front n 20x12 in rear. Will this setup work without any issues? Does anyone have this setup or tried this? Let me know
|
11-18-2019, 09:17 PM | #2 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I have 20x11.5 in the back with a 325/30/20.
|
11-19-2019, 12:39 AM | #3 |
Drives: 2017 camaro ZL1 Join Date: Jul 2014
Location: south carolina
Posts: 84
|
|
11-19-2019, 06:33 AM | #4 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
No rubbing at all. You have to get the offset right. I went with +41. Keep in mind that this is with a 20x11.5 so you will need to factor in your offset for a 12” wide wheel. If I had to do it again I would have gone with +42 maybe +43 just to get the tire a bit more in side.
|
11-19-2019, 07:31 AM | #5 | |
Drives: 2017 camaro ZL1 Join Date: Jul 2014
Location: south carolina
Posts: 84
|
Quote:
|
|
11-19-2019, 08:13 AM | #6 |
Drives: 2019 ZL-1, Shadow Gray, Sold Join Date: Jan 2019
Location: Fredericksburg, VA
Posts: 1,390
|
The factory wheels are +23 and +43, front and rear, respectively, I believe. However, the rear is 11 inch. So the 11.5 has to be an aftermarket wheel.
|
11-19-2019, 01:34 PM | #7 |
Bannable
|
Several wheel manufacturers I have talked to have said that it is much easier to run 19x12 vs 20x12. They say 20x12 is doable but much more sensitive to tire sizes, lowering springs, etc. I personally think that 19's look better on our cars as well.
__________________
One must forego the self to attain total spiritual creaminess, and avoid the chewy chunks of degradation
2017 ZL1 A10 - Hyper Blue Metallic Rotofab CAI, TM ported TB, AWE non res touring catback with PLP's |
11-19-2019, 09:08 PM | #8 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
This is aftermarket wheels as someone as already stated what the OEM sizes are.
Also someone stated that 19s work better with a 12” wide. I would agree as there are more options and someone on this site has done a 345/30/19 which has to be crazy wide. At any rate I love the look of the 20s so I kept with that. A 325 is more than enough. |
|
|
Post Reply
|
|
|