Service Tire Monitor System - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tonysbroncos · 08-14-2020, 10:25 AM

Recently purchased a 2010 Camaro, two days after the purchase, the Service Tire Monitor System error popped up. I went thru the manual reset process and the error goes away for two days but then it comes back up. The issue pertains to the front driver side wheel, which I have now replaced the sensor on it twice and the same issue keeps happening. Can this be a computer issue? Any suggestions on what to try next?

Thanks in advance.

Deputy347k9 · 08-14-2020, 11:38 AM

And welcome to the Forum!

IOM Bullet · 08-14-2020, 03:06 PM

Do you have any of the replaced/old sensors in your Camaro? If you do, the car is trying to read all of them. This happened to me after replacing one of my sensors. I had the old one in the glove box. If you do, throw it away.

Also, I bought an aftermarket sensor (to save money) and the car could not read it. I replaced that with an OEM sensor and it worked fine.

'10CamaroDude · 08-14-2020, 08:28 PM

Mine does it too, front left, all the time. Usually after many miles of driving when the
wheels heat up. Then the rear left, then both. Now, just the right rear..

If I remove the aftermarket intake, it all goes back to normal, figure that one out...
I put the intake back on two weeks ago, and TPMS is acting up again.

102SS · 08-14-2020, 09:14 PM

No big deal just hit the button on the end of the stock to clear the dic.

Check your pressures with a gauge once a month like the old days

08-14-2020, 10:25 AM	#1
tonysbroncos Drives: 2010 Camaro Join Date: Aug 2020 Location: Chicago Posts: 2	Service Tire Monitor System Recently purchased a 2010 Camaro, two days after the purchase, the Service Tire Monitor System error popped up. I went thru the manual reset process and the error goes away for two days but then it comes back up. The issue pertains to the front driver side wheel, which I have now replaced the sensor on it twice and the same issue keeps happening. Can this be a computer issue? Any suggestions on what to try next? Thanks in advance.

08-14-2020, 11:38 AM	#2
Deputy347k9 Drives: 2014 Ashen Gray Convertible Join Date: Apr 2017 Location: Havelock, NC Posts: 1,328	And welcome to the Forum! __________________

08-14-2020, 09:14 PM	#5
102SS waiting at the tree Drives: SIM 2010 2SS/RS A6 Join Date: Apr 2013 Location: Niagara Falls Posts: 3,143	No big deal just hit the button on the end of the stock to clear the dic. Check your pressures with a gauge once a month like the old days __________________ 2010 2SS/RS A6 ZL1 Rims 60ft 2.03 13.08 at 107.82 (4/28) 2009 Pontiac G8 3.6L the DD

08-14-2020, 03:06 PM	#3
IOM Bullet Drives: 2010 2SS RS LS3 Join Date: Jul 2017 Location: Minnesota Posts: 21	Do you have any of the replaced/old sensors in your Camaro? If you do, the car is trying to read all of them. This happened to me after replacing one of my sensors. I had the old one in the glove box. If you do, throw it away. Also, I bought an aftermarket sensor (to save money) and the car could not read it. I replaced that with an OEM sensor and it worked fine.

08-14-2020, 08:28 PM	#4
'10CamaroDude Account Suspended Drives: 2010 Camaro LS Join Date: Nov 2019 Location: Pgh Posts: 739 View My Garage	Mine does it too, front left, all the time. Usually after many miles of driving when the wheels heat up. Then the rear left, then both. Now, just the right rear.. If I remove the aftermarket intake, it all goes back to normal, figure that one out... I put the intake back on two weeks ago, and TPMS is acting up again.