08-01-2020, 03:05 PM | #1 |
Drives: Camaro SS 2010 Join Date: Sep 2019
Location: San Francisco
Posts: 4
|
Kill Switch help!!!
Hello guys,
I´m trying to put a kill switch in ignition switch but there´re two ignition wires (pink wires pin 1 and 4) and car only shut down if you cut both of them. If you cut only one it does not work. Could you give me some hints of how do this? o What wire will be a better option for the Kill Switch? https://ibb.co/jgwHmZg Regards. |
08-01-2020, 09:50 PM | #2 |
Give speed a chance
Drives: 2015 Camaro 2LS, 2015 Camaro Z/28 Join Date: Nov 2019
Location: Mesa, Az
Posts: 2,234
|
I've considered installing an anti-theft switch also. I was thinking about turning off the power to the fuel pump relay. I haven't gotten to the point of checking wiring diagrams but it seems like a possibility. Just don't want to trip any codes or create any gremlins.
__________________
2LS: a TREMENDOUS machine. Z/28: it's a BIT MORE POWERFUL, of course.
|
08-02-2020, 02:11 AM | #3 |
Account Suspended
|
F1 in your interior fuse box (left dash) should be Discrete Logic Ignition Switch.
Pull the fuse, and put in a switched fused jumper... |
08-13-2020, 12:45 PM | #4 |
Drives: 2010 2SS RS LS3 Join Date: Jul 2017
Location: Minnesota
Posts: 21
|
Check out youtube Chris fix installing a kill switch. I am thinking about doing it. Just have to find a good spot to hide the switch.
|
|
|
|
|