04-24-2016, 08:13 PM | #1 |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Want to see lowered with 20mm Spacers?
I've done a lot of changes to the car after eight days of ownership! But, without a doubt, the biggest change was installing the GM Lowering Kit and 20mm wheel adapters. I wanted to get some better pictures up in the General section for those considering this mod. I had plenty of people asking me for side shots showing where the tire sits in relation to the fender now. I did have to trim the non-threaded end of the wheel studs to install these adapters, so it's not 100% reversible. You can find more information here - http://www.camaro6.com/forums/showthread.php?t=449451 I'm waiting for an appointment for an alignment at my local dealer, and once I get the wheels positioned correctly again (I think the rear has too much camber), I'll consider adding 25mm rear adapters instead. I think they could come out just a hair more to match the fronts. I didn't run the offset numbers, but the stance with the new offsets looks very similar to last gen ZL1s.
I also added the GM front splitter, painted the brake calipers with G2 Caliper paint and the rotor hats gloss black, installed BigWorm marker light Gun Smoke film, removed the fender emblem and rear SS emblem, tinted the windows 18% and had Clear Bra installed on front, hood, mirrors, behind front wheels and in front of rear wheels. I also clayed, polished, and sealed the paint...like I said, it's been a busy week!
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
04-24-2016, 08:25 PM | #2 |
Drives: 2013 Hot Wheels Edition 2SS/RS Join Date: Jun 2015
Location: Orlando, FL
Posts: 198
|
Great stance. You're right, it's been a busy week for you. White is super popular, but not a personal favorite of mine on a Camaro -- yours looks awesome though!
|
04-24-2016, 08:37 PM | #3 |
Drives: 6GC Join Date: Apr 2016
Location: San Francisco, CA
Posts: 75
|
Sitting beautiful!
|
04-24-2016, 09:25 PM | #4 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
Looks great!
|
04-24-2016, 09:58 PM | #5 |
Drives: 3015 300s Join Date: Mar 2016
Location: Austin tx
Posts: 130
|
Looks great man , the lowering kit will be my next mod , after I get the fascia extension out of the way (it's on its way) . I have also only had my car for about 20 days. And have already done the bigworm markers / tailight tints , painted badges from Lupe, tinted windows, ordered the splitter, and a new set of rims.
Haven't even made my first payment yet ... this is a sickness ! Took the car to two car gatherings this weekend and was surprised how many people have never seen a 2016 , most knew all about them but never actually seen one. I love the way your car sits .. the stance is just right
__________________
2016 Mosaic Black Metallic 1SS NPP M6
|
04-25-2016, 04:16 AM | #6 |
Drives: 2016 Silverado Join Date: Jan 2015
Location: Texas
Posts: 47
|
Where did you get the spacers and how much? Can you post the ordering specs so that I can get them for mine?
|
04-25-2016, 05:13 AM | #7 | |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Quote:
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
|
04-25-2016, 05:14 AM | #8 | |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Quote:
How did you do your tail lights, film or paint? Any pics?
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
|
04-25-2016, 06:03 AM | #9 |
Drives: 3015 300s Join Date: Mar 2016
Location: Austin tx
Posts: 130
|
The taillight tints are bigworm also
__________________
2016 Mosaic Black Metallic 1SS NPP M6
Last edited by JustShootMe; 04-25-2016 at 06:15 AM. |
04-25-2016, 06:12 AM | #10 | |
Drives: 2016 Corvette Z06 M6 Join Date: May 2009
Location: Odenton, MD
Posts: 874
|
Quote:
__________________
2013 Dodge Viper #44/150 Launch Edition IG:@absoluthank
20/21 BC Forged Wheels : BC Coilovers: TA Aero |
|
04-25-2016, 06:36 AM | #11 | |
Drives: 3015 300s Join Date: Mar 2016
Location: Austin tx
Posts: 130
|
Quote:
That would look great on a white car! I'm trying to avoid blacking everything out on a black car , gotta have some sort of contrast when it's all said and done. The black car / blacked out everything look has been done to death in my opinion ... not the route I want to go .
__________________
2016 Mosaic Black Metallic 1SS NPP M6
|
|
04-25-2016, 07:43 AM | #12 |
Your car looks great and honestly white (and possibly silver) is the only color the gray painted split spokes look good on.
Last edited by SDG23; 04-26-2016 at 08:47 AM. |
|
04-25-2016, 10:56 AM | #13 |
#becauseracecar
Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015
Location: Phoenix
Posts: 2,959
|
What a beautiful car. Very clean and well done!
|
05-03-2016, 05:17 PM | #14 |
"M1SS1LE"
Drives: 2017 SS 1LE Join Date: Dec 2015
Location: Upstate SC
Posts: 2,906
|
This car is gorgeous! Because of this thread I have to buy some OEM split spokes like these to run some all season tires on and store the standard 1LE wheels when its not summer.
__________________
MJK3888 Instagram Link
|
|
|
Post Reply
|
|
|