01-12-2021, 01:07 PM | #1 |
ZL1 Front Camera Mount
Hey guys, if anyone is looking for an easy snap on, no drill/cut camera mount for their ZL1 let me know. I wanted a camera up front to prevent any curbing of the lower chin so I designed/printed this little guy and it works PERFECT! Currently I only have one for the ZL1 lower grille but if there is a demand for the SS I can start designing one for that.
This is the camera I am using. https://www.ebay.com/itm/170-CMOS-Ca...sAAOSw4WJfQOE2
__________________
2011 Synergy Green 2SS/RS
SOLD - 1985 S10 434SBC 10.40 @ 130 all motor 91oct. Last edited by OneSickS10; 01-12-2021 at 01:16 PM. Reason: Camera link |
|
01-12-2021, 02:48 PM | #2 |
I am not "Fast & Furious"
Drives: 2010 Camaro LSX454 1LE Join Date: Nov 2008
Location: Greeley Colorado
Posts: 1,040
|
That's pretty cool. I would be interested in a mount for the SS grill.
__________________
The day I take a bend too fast
Judgement that could be my last I'll be wiped right off the slate Don't wait up 'cause I'll be late, I'll be late |
01-13-2021, 08:33 AM | #3 |
Drives: 2012 Camaro SS Convertible 6MT Join Date: Jun 2020
Location: Algonquin, IL
Posts: 258
|
I would be extremely interested in one for the SS grill, pending reasonable pricing.
|
01-13-2021, 12:32 PM | #4 |
Cool, thanks for the response guys. I will start working on an SS model. As far as pricing goes. If I am just supplying the mount (with the 2 screws/nuts shown), I'm thinking either $20 + shipping or $25 including shipping(US). I'm not 100% sure of shipping rates around the country but it'll only be in a padded envelope.
__________________
2011 Synergy Green 2SS/RS
SOLD - 1985 S10 434SBC 10.40 @ 130 all motor 91oct. |
|
01-13-2021, 07:03 PM | #5 |
Drives: 2011 Inferno Orange Camaro 2SS/RS Join Date: Nov 2011
Location: Pittsburgh, PA
Posts: 1,368
|
I have had that camera on the front of my SS for 5 years. Amazon Camera and 3m double sided tape. Has not moved one bit in 5 years. I have mine a little further back so you can barely see it.
|
01-13-2021, 07:08 PM | #6 |
Drives: 2011 Inferno Orange Camaro 2SS/RS Join Date: Nov 2011
Location: Pittsburgh, PA
Posts: 1,368
|
I used this one:
https://www.amazon.com/RAAYOO-Univer...0586306&sr=8-3 The back of the lower grill is not solid so you can slide the mount right inside one of the fins from the back. (you just need to turn the mount around) Very discrete and well hidden. small amount of 3m tape on the back and you'll never have to worry about it. |
01-13-2021, 07:10 PM | #7 | |
Quote:
Oh yea? Nice, I didn't think double sided tape would hold it between the air rushing through and the mount being so small. 👍🏻
__________________
2011 Synergy Green 2SS/RS
SOLD - 1985 S10 434SBC 10.40 @ 130 all motor 91oct. |
||
01-18-2021, 08:52 PM | #8 |
Drives: 2010 ss/rs 6 speed manual Join Date: Aug 2013
Location: Ny
Posts: 584
|
I might consider one for my zl1 front bumper.
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
|
02-08-2021, 02:21 PM | #9 |
Drives: 2011 Chevrolet Camaro SS Join Date: Jan 2021
Location: Stockton, CA
Posts: 14
|
I would like one for my 11 SS
|
02-09-2021, 08:35 AM | #10 | |
Drives: 2012 Camaro SS Convertible 6MT Join Date: Jun 2020
Location: Algonquin, IL
Posts: 258
|
Quote:
Thanks! Last edited by DMan918; 02-09-2021 at 08:49 AM. |
|
05-06-2022, 07:53 AM | #11 |
Drives: 2011 Chevrolet Camaro SS Join Date: Jan 2021
Location: Stockton, CA
Posts: 14
|
Any update ?
|
|
|
|
|