CHECK OUT MY NEW CUSTOM SHIFT KNOB !!!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BLACK10 · 10-22-2009, 05:58 PM

This is my new billet shift knob(s) from BARTON INDUSTRIES, they are a new vendor here on C5. After talking to them about making a special engraving i wanted, and also one that a friend wanted, they sent me the CAD drawing to OK, then a couple days later.........

The pistol grip is BY FAR the most comfortable shift knob i have ever felt. It makes it seem that it is a short-throw now. They have some of the best craftmenship i have ever seen, and THE best , clearest instructions to match.

It took me about 5-10 min. to install the adaptor, and now that its on, i can switch the knobs out in seconds.

The ball knob is WAY more comfortable than the factory knob also. It will also work with the black stick hurst short-throw shifter also.

TOP QUALITY FOR SURE

Check them out here....
http://stores.shop.ebay.com/barton-ind__W0QQ_armrsZ1

and here
http://www.camaro5.com/forums/showthread.php?t=47719

tjd24 · 10-22-2009, 06:02 PM

They look great - haven't seen an Iron Cross on anything in quite a while - looks superb.

BLACK10 · 10-22-2009, 09:17 PM

this is a great way to put a personal touch on your car or dress up the interior

OuSoonersGirl · 10-22-2009, 09:44 PM

Quote:

Originally Posted by BLACK10

this is a great way to put a personal touch on your car or dress up the interior

Yes indeed. They look great!!!!

guydon · 10-22-2009, 10:02 PM

Very nice. How does the pistol grip feel while shifting? Also is it right that the stock knob just "pulls" off? Great looking addition!

BLACK10 · 10-23-2009, 08:08 AM

Quote:

Originally Posted by guydon

Very nice. How does the pistol grip feel while shifting? Also is it right that the stock knob just "pulls" off? Great looking addition!

Yes, it does just pull off, i was surprised just how easy it was to pull off.

the pistol grip feels just right, and it seems eaisier to shift, VERY comfortable

2010 2-Tone · 10-23-2009, 08:24 AM

Looks good Nick.

I am sure the other is for Tommy. What did yours run you?

BLACK10 · 10-23-2009, 08:27 AM

thanks,

the kit and the custom knob was $120, not bad for a billet anodized knob(s) with my choice of engraving

Kyle2k · 10-23-2009, 11:38 AM

I like the round SS one the best.

kelleyperformance · 10-23-2009, 11:41 AM

im loving that round one!

so the OE knob is just pressed on?? no set screws or anything???

WICKEDSS · 10-23-2009, 01:28 PM

WOW thats pretty neat.....Do they have a web site it wont let me go to ebay to buy one and i dont have a paypal account i would have to pay with a debit card....So if there is anyother way to get one let me know please

WICKEDSS · 10-23-2009, 01:29 PM

Quote:

Originally Posted by kelleyperformance

im loving that round one!

so the OE knob is just pressed on?? no set screws or anything???

Yup pressed on....a firm tug and and its off....All most hit my self in the face taking it off so watch out

DocHolliday · 10-23-2009, 01:33 PM

That pistol grip is sweet!

kelleyperformance · 10-23-2009, 01:36 PM

huh, the first camaro we got the knob came loose from causual driving to the gas station... nice to know its pressed so its always gunna be loose :(

10-22-2009, 05:58 PM	#1
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	CHECK OUT MY NEW CUSTOM SHIFT KNOB !!!! This is my new billet shift knob(s) from BARTON INDUSTRIES, they are a new vendor here on C5. After talking to them about making a special engraving i wanted, and also one that a friend wanted, they sent me the CAD drawing to OK, then a couple days later......... The pistol grip is BY FAR the most comfortable shift knob i have ever felt. It makes it seem that it is a short-throw now. They have some of the best craftmenship i have ever seen, and THE best , clearest instructions to match. It took me about 5-10 min. to install the adaptor, and now that its on, i can switch the knobs out in seconds. The ball knob is WAY more comfortable than the factory knob also. It will also work with the black stick hurst short-throw shifter also. TOP QUALITY FOR SURE Check them out here.... http://stores.shop.ebay.com/barton-ind__W0QQ_armrsZ1 and here http://www.camaro5.com/forums/showthread.php?t=47719 Attached Images Last edited by BLACK10; 10-22-2009 at 09:16 PM.

10-22-2009, 06:02 PM	#2
tjd24 Thank you Oshawa/St.Cats! Drives: was 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009 Location: NW NJ Posts: 3,481 View My Garage	They look great - haven't seen an Iron Cross on anything in quite a while - looks superb. __________________ #3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 - Traded-in 8/31/2019:

10-23-2009, 11:38 AM	#9
Kyle2k LVL 50 Troll Stomper Drives: 2010 Camaro Join Date: Feb 2008 Location: Indianapolis Posts: 3,463	I like the round SS one the best. __________________

10-23-2009, 11:41 AM	#10
kelleyperformance Drives: DD- 15' Chevy SS Sedan Join Date: Oct 2009 Location: Ft. Lauderdale Posts: 233	im loving that round one! so the OE knob is just pressed on?? no set screws or anything??? __________________

10-23-2009, 01:33 PM	#13
DocHolliday Drives: '14 Blade Silver Z51 Join Date: Jun 2009 Location: Northern Virginia Posts: 559	That pistol grip is sweet! __________________ Say When

10-22-2009, 09:17 PM	#3
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	this is a great way to put a personal touch on your car or dress up the interior

10-22-2009, 10:02 PM	#5
guydon Drives: 2010 Black SS Join Date: Oct 2009 Location: Lacey, WA Posts: 103	Very nice. How does the pistol grip feel while shifting? Also is it right that the stock knob just "pulls" off? Great looking addition!

10-23-2009, 08:24 AM	#7
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Looks good Nick. I am sure the other is for Tommy. What did yours run you?

10-23-2009, 08:27 AM	#8
BLACK10 Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009 Location: Lafayette, Louisiana Posts: 4,585	thanks, the kit and the custom knob was $120, not bad for a billet anodized knob(s) with my choice of engraving

10-23-2009, 01:28 PM	#11
WICKEDSS Dan Drives: THE BEAST Join Date: Sep 2009 Location: ODESSA,TX Posts: 336	WOW thats pretty neat.....Do they have a web site it wont let me go to ebay to buy one and i dont have a paypal account i would have to pay with a debit card....So if there is anyother way to get one let me know please

10-23-2009, 01:36 PM	#14
kelleyperformance Drives: DD- 15' Chevy SS Sedan Join Date: Oct 2009 Location: Ft. Lauderdale Posts: 233	huh, the first camaro we got the knob came loose from causual driving to the gas station... nice to know its pressed so its always gunna be loose :( __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom Magnaflow Exhaust	buddylok	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	49	05-16-2016 11:02 AM
Dealer Worried about Pre-Approved Loan Check (PenFed)	Embalmer	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	36	03-25-2015 11:09 AM
New flash tuner - ?old to 'Stang - new to 'Maro?	radz28	Tuning / Diagnostics -- engine and transmission	0	08-26-2009 01:10 PM
Check out my custom poker table	95RedCamaroz28	Off-topic Discussions	4	04-14-2009 10:07 PM
Voice Your Comments/Suggestions/Input for Focus Group on 2010 Camaro	Mr. Wyndham	5th Gen Camaro SS LS LT General Discussions	236	04-22-2008 12:43 AM