09-14-2020, 10:46 PM | #1 |
Razor Edge Customs
|
2019 ZL1 1LE Lower Splash Shield part number help
Can anyone assist with the part number for the lower splash shield under the trans cooler on my 2019 ZL1 1LE A10?
Every one I find is different from the one on my car. I guess it is from the extra 1LE cooling. Busted mine up on a curb
__________________
Razor Edge Customs
Williamson, GA 2022 ZL1 1LE (427 w/ Kong 2650 going in) 2004 GMC Sierra RCSB 5.3L (have TT 6.0L going in) |
09-14-2020, 11:53 PM | #2 |
Drives: 2018 ZLE Join Date: Apr 2018
Location: Des Moines
Posts: 227
|
84084634
__________________
2018 ZL1 1LE (CARBON/PDR/NAV)
|
09-15-2020, 04:28 PM | #3 |
Razor Edge Customs
|
Thank you for the help, but that is not the same as the one on my car. Mine is the same as the photo.
Any further help locating this part would be appreciated.
__________________
Razor Edge Customs
Williamson, GA 2022 ZL1 1LE (427 w/ Kong 2650 going in) 2004 GMC Sierra RCSB 5.3L (have TT 6.0L going in) |
09-15-2020, 05:12 PM | #4 |
Drives: 2018 ZLE Join Date: Feb 2018
Location: Palm City Fl
Posts: 1,346
|
I think that is the part your looking for. I think its the same for the 1LE.
|
09-15-2020, 07:10 PM | #5 | |
Razor Edge Customs
|
Quote:
GM 84084634 looks like this:
__________________
Razor Edge Customs
Williamson, GA 2022 ZL1 1LE (427 w/ Kong 2650 going in) 2004 GMC Sierra RCSB 5.3L (have TT 6.0L going in) |
|
09-15-2020, 07:20 PM | #6 |
Drives: 2018 ZLE Join Date: Feb 2018
Location: Palm City Fl
Posts: 1,346
|
I actually need the same part as mine has a tiny scuff but I stare at it on my lift. I was thinking that was the bottom of it? m interested in the actually part as well.
|
09-16-2020, 03:17 AM | #7 | |
Drives: 2018 ZLE Join Date: Apr 2018
Location: Des Moines
Posts: 227
|
Quote:
No further help is necessary, 84084634 is the part you are looking for. The illustration does not match the actual part.
__________________
2018 ZL1 1LE (CARBON/PDR/NAV)
|
|
09-16-2020, 09:47 AM | #8 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Apr 2019
Location: Calimesa, CA
Posts: 63
|
Your existing part should probably have a part # stamped on it. That might help to narrow down if you have a part that's available or maybe was replaced with a new splash shield model.
|
09-17-2020, 04:09 PM | #9 |
Geoff
Drives: 2020 ZL1 Green Join Date: May 2013
Location: Houston
Posts: 1,720
|
84084634 looks like this on the 2020 ZLE diagram, same for both ZL1 and ZLE. I only looked up A10 models
__________________
|
09-17-2020, 04:27 PM | #10 |
Drives: 2017 ZL1 Join Date: Apr 2020
Location: South florida
Posts: 332
|
ILE has extra cooling ? I wasn't aware of that ? Educate me please
__________________
2017 ZL1 M6 Silver Ice Metallic
|
09-17-2020, 04:58 PM | #11 |
Drives: 2018 ZLE Join Date: Feb 2018
Location: Palm City Fl
Posts: 1,346
|
Technically it takes in more air with the running lights removed and larger grill opening, maybe thats what he heard and thought. I think its 106 cubic feet more air per minute at 80 something miles per hour. I believe it to be the same part though for either car.
Last edited by pauly1119; 09-17-2020 at 06:01 PM. |
09-17-2020, 06:30 PM | #12 | |
Drives: Chevrolet Camaro, Ford Mustang Join Date: Oct 2019
Location: AZ
Posts: 388
|
Quote:
If you also need 1LE specific power steering cooling kit that attaches to that, it is: 84669205 Best Regards, Dave
__________________
2022 SS 1LE - Vivid Orange - SCCA CAM-C & Optima Ultimate Street Car GT
Katech, MSD, QA1, Hurst, Anderson Composites, ProParts USA Custom Suspension, MFR Engineering, Forgeline Wheels, G-Loc Brakes, Nine Lives Racing, MTX Audio, Penske Rapid Repair |
|
09-17-2020, 06:42 PM | #13 |
Drives: 66 Chevelle SS Join Date: Mar 2013
Location: SoCal
Posts: 1,347
|
OR..... Call a dealer parts dept , give them your VIN and they will look up the p/n for your car.
__________________
66 Chevelle SS 396
91 octane Driver n/a 6.44@105.78 1/8th mile |
|
|
Post Reply
|
|
|