ZL1 headers question

CrushZL1 · 01-24-2022, 11:43 AM

I currently have a 2020 ZL1 with factory headers still and a Borla ATAK cat-back exhaust system. A buddy of mine recently sold his ZL1 and wants to sell me his American Racing long tube headers for next to nothing. Obviously I can't install them as they sit with the Borla cat back I have, but is there any way to modify them so that it would work?

LiqTenExp · 01-24-2022, 12:19 PM

I initially had the Borla Sport system with stock headers. Shop was able to adapt the full borla catback system to meet up with the ARH midpipe slip over fittings.

CW3SF · 01-24-2022, 12:27 PM

You just have to lay all the parts out and see what it looks like. I started with AWE axleback, added AWE link pipes, then did ARH headers and X-pipe, then added resonators. They aren’t specifically designed to mate up but after an hour with a cutoff wheel and the band clamps that came with the systems I made it work.

SJFGTO · 01-24-2022, 01:10 PM

As long as you do not remove the cats, a good muffler/exhaust shop will be able to fabricate the necessary connections. Keep in mind that you will need a tune and that a quality set of plug wire sleeves are a good investment.

musclesbmf · 01-26-2022, 03:48 PM

I have borla ATAK entire system with CSP headers and did the install myself. Everything will fit.

Mark

01-24-2022, 11:43 AM	#1
CrushZL1 Drives: 2020 Chevy Camaro ZL1 Join Date: Feb 2021 Location: NJ Posts: 2	ZL1 headers question I currently have a 2020 ZL1 with factory headers still and a Borla ATAK cat-back exhaust system. A buddy of mine recently sold his ZL1 and wants to sell me his American Racing long tube headers for next to nothing. Obviously I can't install them as they sit with the Borla cat back I have, but is there any way to modify them so that it would work?

01-24-2022, 12:19 PM	#2
LiqTenExp Drives: 2017 ZL1 Join Date: Jan 2017 Location: NJ Posts: 905	I initially had the Borla Sport system with stock headers. Shop was able to adapt the full borla catback system to meet up with the ARH midpipe slip over fittings. __________________ 2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)

01-24-2022, 12:27 PM	#3
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	You just have to lay all the parts out and see what it looks like. I started with AWE axleback, added AWE link pipes, then did ARH headers and X-pipe, then added resonators. They aren’t specifically designed to mate up but after an hour with a cutoff wheel and the band clamps that came with the systems I made it work. __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

01-24-2022, 01:10 PM	#4
SJFGTO Oh Oh it's Friday Night! Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018 Location: Walton Woods Posts: 1,061	As long as you do not remove the cats, a good muffler/exhaust shop will be able to fabricate the necessary connections. Keep in mind that you will need a tune and that a quality set of plug wire sleeves are a good investment. __________________ 2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm Four that wanna own me Two that wanna stone me One says she's a friend of mine...

01-26-2022, 03:48 PM	#5
musclesbmf Drives: 2020 ZL1 1LE A10 Join Date: Feb 2021 Location: Lutz, FL Posts: 78	I have borla ATAK entire system with CSP headers and did the install myself. Everything will fit. Mark

User Name		Remember Me?
Password