03-16-2016, 01:25 PM | #1 |
Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016
Location: Indiana
Posts: 891
|
Removing the door to body harness
I had to figure out how to remove these so I could add some wires for my Interior Spectrum lighting dark night. The black boot has a clip at the top you push down on once you pull the boot away from the car a little bit. Once you push down the boot will pull away and rotate down to pull off of the connector. Yes there was a red lock you have to pull down. Once that is out of the way you can rotate the lock upward to release the door connector from the body connector.
__________________
2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer |
06-04-2020, 01:43 AM | #2 |
Long hauler
|
Thanks for this, really helpful on routing wires through. I tried without unplugging and gave up but your post saved me
__________________
|
|
|
Post Reply
|
|
|