Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Tuning / Diagnostics


BeckyD @ James Martin Chevy


Post Reply
 
Thread Tools
Old 05-13-2018, 07:58 PM   #1
Hyper1SS

 
Hyper1SS's Avatar
 
Drives: 2016 Hyper Blue Metallic 1SS M6 NPP
Join Date: Jan 2016
Location: Indiana
Posts: 891
Headers and tune?

If this is out there please post the link. I could not find them. So browsing the internet I have found several answers but most were for the 5th Gen Camaro. I recently installed TSP 1 7/8 headers with cats on my 2016 SS M6. I also have the 3" MBRP race catback exhaust system. I have never done much to my Camaro's besides simple bolt ons like a cold air intake so this is all new to me. So is it a good or bad idea to drive around like this without a tune? Will it cause issues where I need to change the plugs? If so what do you recommend? I bought the HP Tuners and AEM wideband and was going to have a remote tune done but don't feel comfortable enough right now to do that myself plus heard it would only be around 85% what I need so I decided to have a shop so a dyno tune but they are 1.5 hours away from me. I just want to get the right and correct answer for the Gen 6 and LT1 engine. It did throw a engine light and when I checked they were for the two O2 sensors I do not have hooked up after the cats. Thank you
__________________


2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates.

Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges


Order ID: TDHQMS
1100 on 01/07/2016 at Penske Chevrolet
6000 on 02/23/2016 Delivered to customer

Last edited by Hyper1SS; 05-14-2018 at 05:00 AM.
Hyper1SS is offline   Reply With Quote
Old 05-15-2018, 08:43 AM   #2
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
Quote:
Originally Posted by Hyper1SS View Post
If this is out there please post the link. I could not find them. So browsing the internet I have found several answers but most were for the 5th Gen Camaro. I recently installed TSP 1 7/8 headers with cats on my 2016 SS M6. I also have the 3" MBRP race catback exhaust system. I have never done much to my Camaro's besides simple bolt ons like a cold air intake so this is all new to me. So is it a good or bad idea to drive around like this without a tune? Will it cause issues where I need to change the plugs? If so what do you recommend? I bought the HP Tuners and AEM wideband and was going to have a remote tune done but don't feel comfortable enough right now to do that myself plus heard it would only be around 85% what I need so I decided to have a shop so a dyno tune but they are 1.5 hours away from me. I just want to get the right and correct answer for the Gen 6 and LT1 engine. It did throw a engine light and when I checked they were for the two O2 sensors I do not have hooked up after the cats. Thank you
With the tuning equipment you have I can help you with a 100% tune.

Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 05-18-2018, 09:23 AM   #3
Hyper1SS

 
Hyper1SS's Avatar
 
Drives: 2016 Hyper Blue Metallic 1SS M6 NPP
Join Date: Jan 2016
Location: Indiana
Posts: 891
Quote:
Originally Posted by JANNETTYRACING View Post
With the tuning equipment you have I can help you with a 100% tune.

Ted.
I found a shop close so I sold my items. Thanks
__________________


2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates.

Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges


Order ID: TDHQMS
1100 on 01/07/2016 at Penske Chevrolet
6000 on 02/23/2016 Delivered to customer
Hyper1SS is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:26 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.