You are browsing camaro6 
03-18-2022, 08:23 PM
|
#1 |
|
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,049
|
PIN38 is KICKING MY A**
Afternoon friends, I am installing my flex link E 85 kit on my 2021 ZL1, and seem to have hit a roadblock with the pin 38 connector. All of the videos that I have seen online clearly show a gray pin holding the location open. But my connector has none. Port 38 is definitely an empty port, but my pin does not fit in the hole, looks like all of the blank places have a very small black piece holding it shut, not sure if I’m supposed to punch it out or not. And don’t want to mess up the port. Can anyone please chime in?
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
|
|
|
03-18-2022, 09:02 PM
|
#2 |
|
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,049
|
Pin.59 is the only one with a gray pin placeholder…
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
|
|
|
|
03-18-2022, 10:02 PM
|
#3 |
          
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
there is a little black plug blocking the way and I had the same issue on my '21 ZLE. Watch a flex fuel install video on an LT4 Z06 and you will understand. The flex fuel pin will not go in without gently pressing out the black plug first. I think I posted about this roadblock and will try to find the thread.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
03-18-2022, 10:03 PM
|
#4 |
|
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
03-19-2022, 08:07 AM
|
#5 |
 Drives: Camaro ZL1 Join Date: May 2020
Location: FL
Posts: 30
|
punch it out
|
|
|
|
|
03-19-2022, 08:54 AM
|
#6 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
If you still need help, I'm down in Vista today. Might be able to swing by if you're still having a hard time. Like they said make sure you have the correct pin and you have to punch out the plastic place holder
|
|
|
|
|
03-19-2022, 09:07 AM
|
#7 |
|
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
In case you didn't already have it
|
|
|
|
|
03-20-2022, 11:52 AM
|
#8 |
|
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,049
|
Thanks guys… I was able to punch it out… was just reluctant based on all the other videos I watched that had the gray plug. Thanks again!
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
