07-22-2017, 12:58 PM | #15 |
Drives: 2010 CobaltSSTC Join Date: Sep 2015
Location: Ontario
Posts: 515
|
Windshield mate. Fogging issue has been present since 6th gen launch, hoped to be fixed when zl1 came out but no dice.
|
07-22-2017, 01:02 PM | #16 |
Drives: 2016 Z06, 2017 ZL1 Join Date: Feb 2012
Location: Las Vegas
Posts: 305
|
|
07-22-2017, 01:03 PM | #17 |
Drives: Gen 6 ZL1 White Join Date: Jul 2017
Location: Dubai
Posts: 12
|
Yep - exactly the same, mate. And very annoying!! I too have crawled through the car to release from the inside. Not the most elegant of fixes!
|
07-22-2017, 01:06 PM | #18 | |
Drives: Gen 6 ZL1 White Join Date: Jul 2017
Location: Dubai
Posts: 12
|
Quote:
I thought they were cooled AC seats that work initially but then seem to stop. It all makes more sense now! |
|
07-22-2017, 01:09 PM | #19 |
Drives: 2016 Z06, 2017 ZL1 Join Date: Feb 2012
Location: Las Vegas
Posts: 305
|
I just had 2 wheels replaced due to large clear coat runs. Passenger side panel in front of rear wheel chipped at corner, Dealer fixed that also. Hood latch replaced, Headliner replaced due to it was cut to short and passenger side didn't get covered by weather strip. In order to replace headliner they claimed the windshield had to be replaced too. I hope this list ends soon. And I thought my z06 was a POS.
|
07-22-2017, 02:50 PM | #20 | |
Drives: 17 NFG ZL1 17 GTR 22 RS6 Join Date: Apr 2017
Location: Upper Marlboro MD
Posts: 625
|
Quote:
|
|
07-22-2017, 07:08 PM | #21 | |
Drives: '21 ZL1 A10 Convertible Join Date: Sep 2015
Location: USA
Posts: 28
|
Quote:
|
|
07-23-2017, 07:46 AM | #22 | |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Quote:
|
|
07-23-2017, 02:09 PM | #23 | |
Drives: Gen 6 ZL1 White Join Date: Jul 2017
Location: Dubai
Posts: 12
|
Quote:
Regarding the clunking the car has been up on the ramp at Chevrolet and they found no fault. Hmmm. |
|
07-28-2017, 02:53 AM | #24 |
Drives: Gen 6 ZL1 White Join Date: Jul 2017
Location: Dubai
Posts: 12
|
So it seems there is nothing wrong with my suspension. The knock I get over the bumps is only when I go other the first bump that day - it's the magnetic shocks sorting themselves out.
|
07-28-2017, 04:08 AM | #25 |
Drives: 2018 ZL1 A10/2018 GT350R #JR603 Join Date: Jan 2017
Location: Dublin CA
Posts: 819
|
At 400 miles the dealer had to replace the steering rack as whomever built the steering for GM must have ran out of bushing or they were extremely defective. No issue since rack replacement and my odometer is approaching 6000 miles.
__________________
2018GT350R+2018 ZL1 "Red Hot" A10 w/ PDR, Nav, Carbon Fiber Hood insert, Carbon Fiber Dash Insert, Carbon Fiber Fuel Dior & Sun Roof. T/M T-Body, Roto Fab & Borla S Type.
|
07-28-2017, 05:50 AM | #26 | |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
Quote:
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
07-28-2017, 07:58 AM | #27 |
Drives: 2014 Z51 Corvette Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,822
|
What's the issue with the paint cracking?
|
07-28-2017, 05:32 PM | #28 |
Drives: 17 ZL1 Join Date: Mar 2017
Location: VA
Posts: 1,075
|
I have an issue as well. This dam car gives me a shit eating grin everytime I drive it, wish GM could fix that or not.
Ok, thread jacking over
__________________
2017 ZL1 Coupe M6, Red Hot
Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp |
|
|
Post Reply
|
|
|