[Tenacity-99]

So I wanted to see if anyone on this forum knows what vendor I can contact to make a customized Camaro Diecast/Toy Model? I've been looking for a vendor that can create a replica of my 2018 Camaro 2SS with the same color, stripes, etc. in a toy version as a collectible.

Let me know if you have any ideas, thanks!

[01pewterz28]

If you are looking for a Red SS Coupe 1/18 scale is already available with black wheels I have one.

Now I need a Hyper Blue Metallic SS Convertible in 1/18 scale.

[camaroJD]

I want to know this as well, I'd love a model of mine for my office.

[custommx3]

Maisto makes a lot of them in various colors.

https://www.amazon.com/s?k=maisto+ca...f=nb_sb_noss_2


Here's one of mine.

[SSDan]

I also have the Maisto model in 1/18 scale. Click on the link to see a photo of my Gen 5 and Gen 6 in 1/18 scale.

I added the rally stripes using vinyl tape to both models to match my real cars.

note: the scale is off a little between the two models as the Gen 5 is not a Maisto model.

https://www.camaro6.com/forums/showthread.php?t=447592

[Tenacity-99]

Originally Posted by SSDan

I added the rally stripes using vinyl tape to both models to match my real cars.

Thanks for this info. Can you elaborate more on how you got the rally stripes on there? I have found the Camaro SS 6th Gen models in Red with the black wheels, but I just can't find one with the stripes on there. If I can somehow put the stripes on myself, then I'm all set!

[SSDan]

Originally Posted by Tenacity-99

Thanks for this info. Can you elaborate more on how you got the rally stripes on there? I have found the Camaro SS 6th Gen models in Red with the black wheels, but I just can't find one with the stripes on there. If I can somehow put the stripes on myself, then I'm all set!

I got the vinyl tape for the 5th Gen at a hobby store along with an X-Acto hobby knife to cut it. You can probably find both on Amazon as well. The tape for the 6th Gen was some leftover product from when I has a local shop make and put on the rally stripes. For both models I hand cut the tape and through experimentation and a little trial and error I ended up with a result that satisfied me.

[DWR]

I’d love to find a red SS 1LE one... Any ideas for that one?

[Bad Anvil Garage]

Originally Posted by DWR

I’d love to find a red SS 1LE one... Any ideas for that one?

The 1LE only comes in Hyper Blue. There was a guy that took his apart and painted it though. If you're a good hobbyist, seems like it would be a simple project.

[DWR]

Originally Posted by Bad Anvil Garage

The 1LE only comes in Hyper Blue. There was a guy that took his apart and painted it though. If you're a good hobbyist, seems like it would be a simple project.

I feared that was the answer... I’ve thought about doing it but not really sure it’s worth the frustration.

[MackSteelPrivateEye]

I have a Hotwheels and a GreenLight 6th Gen Camaro. Both 1/64 scale. The Greenlight cost less but head over heels better quality than the HW ver. Look it up online. Never even heard of GL until I was searching for 1/64 scale cares.

[MackSteelPrivateEye]

Originally Posted by Tenacity-99

So I wanted to see if anyone on this forum knows what vendor I can contact to make a customized Camaro Diecast/Toy Model? I've been looking for a vendor that can create a replica of my 2018 Camaro 2SS with the same color, stripes, etc. in a toy version as a collectible.

Let me know if you have any ideas, thanks!

Go here...they do custom

http://www.greenlighttoys.com/index.php?id=25

[DWR]

Originally Posted by MackSteelPrivateEye

Go here...they do custom

http://www.greenlighttoys.com/index.php?id=25

“ Custom programs are available in quantities as low as 3,000 pieces for 1:64 scale and 750 pieces for 1:18 & 1:24 scale.”

[MackSteelPrivateEye]

Originally Posted by DWR

“ Custom programs are available in quantities as low as 3,000 pieces for 1:64 scale and 750 pieces for 1:18 & 1:24 scale.”

Order 3000 and sell 2999 of the rest.