Carbon Fiber Rear Diffuser/Valence by Lashway Motorsports - NOW AVAILABLE!

Erik@lashway · 12-23-2013, 10:46 AM

I know everyone has been waiting for this, and it's finally here. This item pictures is the first item made, and does have some slight imperfections, though they are minor. The final parts will look and fit just like this, but will be free of any imperfections.

The item is a direct bolt in, and requires only basic hand tools and about an hour or two of labor one can do at his/her home (should you choose to).

Pricing is below:

Lashway Motorsports C7 Rear Valence, Carbon Fiber (with customer core returned) - $1399.99 plus S&H

Without Core Valence: Add $500 to price

Tech Info:

This part is the factory rear lower valence that we than have 100% REAL Carbon Fiber added to - or laminated as we call it. Parts are laminated locally by G3 Carbon, LLC (as are our other parts available). They are direct bolt on, and require no modification to the rear bumper. Part will come with detailed instructions as well!

Erik@lashway · 12-26-2013, 05:43 PM

For those requesting diffuser "blades" , here you go.

We had these blades made in addition to the diffuser to get the basic look. We installed these on a diffuser (using 3m tape), and are going to get feedback. If people out there like the look, we can then offer a rear diffuser with 4 blades "bonded" into the part - so they'll be part of the rear diffuser.

What do you think?

Erik@lashway · 12-28-2013, 10:59 AM

Hey guys...sorry for the delay in response. We were closed for Christmas.

Anyway, by popular demand, here are some teaser shots of our ground effects in CARBON FLASH METALLIC! They fit and look the same as the Carbon Fiber items, but are identical to the CFM parts you already have on your vehicle in color and finish.

These shots were taken after the last layer of clear. They still need to be wetsanded and polished - but you get the idea.

I will post pricing and better photos once they are mounted on our C7!

Enjoy....

12-23-2013, 10:46 AM	#1
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Carbon Fiber Rear Diffuser/Valence by Lashway Motorsports - NOW AVAILABLE! I know everyone has been waiting for this, and it's finally here. This item pictures is the first item made, and does have some slight imperfections, though they are minor. The final parts will look and fit just like this, but will be free of any imperfections. The item is a direct bolt in, and requires only basic hand tools and about an hour or two of labor one can do at his/her home (should you choose to). Pricing is below: Lashway Motorsports C7 Rear Valence, Carbon Fiber (with customer core returned) - $1399.99 plus S&H Without Core Valence: Add $500 to price Tech Info: This part is the factory rear lower valence that we than have 100% REAL Carbon Fiber added to - or laminated as we call it. Parts are laminated locally by G3 Carbon, LLC (as are our other parts available). They are direct bolt on, and require no modification to the rear bumper. Part will come with detailed instructions as well! Last edited by Erik@lashway; 12-23-2013 at 05:13 PM.

12-26-2013, 05:43 PM	#2
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	For those requesting diffuser "blades" , here you go. We had these blades made in addition to the diffuser to get the basic look. We installed these on a diffuser (using 3m tape), and are going to get feedback. If people out there like the look, we can then offer a rear diffuser with 4 blades "bonded" into the part - so they'll be part of the rear diffuser. What do you think?

12-28-2013, 10:59 AM	#3
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	Hey guys...sorry for the delay in response. We were closed for Christmas. Anyway, by popular demand, here are some teaser shots of our ground effects in CARBON FLASH METALLIC! They fit and look the same as the Carbon Fiber items, but are identical to the CFM parts you already have on your vehicle in color and finish. These shots were taken after the last layer of clear. They still need to be wetsanded and polished - but you get the idea. I will post pricing and better photos once they are mounted on our C7! Enjoy....