how small of a rim can i go - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KevinHoward8509 · 12-29-2020, 02:01 PM

I am working my car over quite a bit this winter.

should put around 1,000 to the tires and wanna work on getting some traction haha.

Was debating on going to a smaller wheel to gain some side wall wrinkle but was not sure how small of a rim i can go down to without needing to look into a conversion kit.

_Onyx_Wolf_ · 12-29-2020, 02:54 PM

I think 17s but you might need a bmr lower control arm that has the notch for clearance

CamaroDreams76 · 12-30-2020, 10:14 AM

I think 18 but if you go with Welds then 17. And ziptie the e brake cable

KevinHoward8509 · 12-30-2020, 11:58 AM

Thanks for the insite.

Still debating on even going with a true wrinkle wall toyo r888r makes a 20 inch radial that im thinking of trying out first.

12-29-2020, 02:01 PM	#1
KevinHoward8509 Drives: 2014 camaro ss 1LE Join Date: Apr 2020 Location: Kalamazoo Michigan Posts: 209	how small of a rim can i go I am working my car over quite a bit this winter. should put around 1,000 to the tires and wanna work on getting some traction haha. Was debating on going to a smaller wheel to gain some side wall wrinkle but was not sure how small of a rim i can go down to without needing to look into a conversion kit. __________________ 2014 SS 1LE summit white RWHP 1032 Modifications are as follows: Engine, forged and stroked 416 CI, Procharger F1A-94 with upgraded race intercooler and big red blow off valve, HP Tuner, AEM Wideband with Gauge, TSP Supercharger Camshaft 224/240 .615/.615 112 +3, Brian Tooley Dual Valve Springs, Brian Tooley Chromoly Pushrods and ported heads. Fore innovations twin 450 pumps on E-85 Brian Tooley Titanium Retainers, GM 3 Bolt Conversion, New GM Oil Pump, Injector Dynamics ID 1700 Injectors, Kooks 1 7/8" Long Tube Headers ,

12-30-2020, 10:14 AM	#3
CamaroDreams76 Tri-County Camaro SWFL Drives: 2013 IOM 2SS/RS/1LE Join Date: Apr 2013 Location: South West FL Posts: 3,095 View My Garage	I think 18 but if you go with Welds then 17. And ziptie the e brake cable __________________ Just bolt ons........ https://www.camaro5.com/forums/showthread.php?t=343023

12-30-2020, 11:58 AM	#4
KevinHoward8509 Drives: 2014 camaro ss 1LE Join Date: Apr 2020 Location: Kalamazoo Michigan Posts: 209	Thanks for the insite. Still debating on even going with a true wrinkle wall toyo r888r makes a 20 inch radial that im thinking of trying out first. __________________ 2014 SS 1LE summit white RWHP 1032 Modifications are as follows: Engine, forged and stroked 416 CI, Procharger F1A-94 with upgraded race intercooler and big red blow off valve, HP Tuner, AEM Wideband with Gauge, TSP Supercharger Camshaft 224/240 .615/.615 112 +3, Brian Tooley Dual Valve Springs, Brian Tooley Chromoly Pushrods and ported heads. Fore innovations twin 450 pumps on E-85 Brian Tooley Titanium Retainers, GM 3 Bolt Conversion, New GM Oil Pump, Injector Dynamics ID 1700 Injectors, Kooks 1 7/8" Long Tube Headers ,

12-29-2020, 02:54 PM	#2
_Onyx_Wolf_ Onyx_Z7 <— Instagram Drives: 2013 2ss 1le Join Date: Aug 2014 Location: Delaware Posts: 634	I think 17s but you might need a bmr lower control arm that has the notch for clearance