6LE Muffler Deletes with Double Walled SS Tips... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

6LITEREATER · 10-30-2009, 11:34 PM

Thanks to Derek (transambandit) for the use of his GORGEOUS 2010 CGM 2SS we developed a muffler delete today that uses 4" DOUBLE WALL stainless steel tips (only other company that makes these tips is Magnaflow and DEALER cost is $150 EACH). Still setting up the jig for production so I don't know pricing yet but we'll offer them with and without tips in aluminized or stainless steel piping and will come with all the clamps so Joe Blow can do this in his own drive way...

Here's some sound clips...

Here you can see our new splitter as well...

Thanks again Derek! If you're interested in buying just go to our site www.6LITEREATERDESIGNS.com click 2010 Camaro and Exhaust. You'll find we our priced lower than the competition but the quality is the same if not better

Thanks for looking

!

towmoe · 10-31-2009, 09:41 AM

Looks and sounds good, but I would caution you here. Not too long ago another company was doing the same type of thing. When I saw the prices I was like

. They were charging a price very close to what I could get a Magnaflow Comp series axle-back setup for. There was no way I was going to pay that much for a non-mandrel bent, non-stainless muffler delete set-up. I could go to my local muffler shop and get it done for half the cost. You're competition is not the big guys but the local muffler shops.

Just a word of advice.

JHart · 10-31-2009, 10:59 AM

yeah i've been priced at i think 140 bucks, that's with stainless tips, from my local shop.

BlaSSt Off · 10-31-2009, 01:21 PM

My local muffler shop did mine and used the factory tips but rotated them so they look better and only charged me $80...

6LITEREATER · 10-31-2009, 03:42 PM

I feel you. When I started to get this made I thought the same thing. Then when all of it is added up, unfortunately this is the price.

My business is not my source of income. I'm actually a working actor (you can see me as "Officer Blake" on General Hospital and recurring on this season's Scare Tactics) and run an apartment complex.

I make and sell car parts just because I enjoy it. I tack a little profit on just to put money back into making new parts.

Long story short, my exhaust guy is paid, jig is paid for, etc... so if they sell they sell if they don't they don't.

The part that makes mine more expensive (cost wise for me) is:

All American Made (I could farm the tips over seas and pay $30 instead of $100 but F that)...

Mandrel Bent (so of course they charge me more)

Stainless Band Clamps (cost 5 times a normal u clamp)

Not to mention paypal fees etc... SO, without a doubt, a local shop could do it cheaper but for those who want to do it themself in their driveway I'm trying to offer the cheapest alternative possible.

Or someone who wants the shop to do it but wants to know they have quality parts on their $40,000 car...

DaddySS · 10-31-2009, 09:03 PM

Nice looking piece, nice job Mark!

10-30-2009, 11:34 PM	#1
6LITEREATER Drives: 1998 Camaro Z28 NBM Join Date: Jul 2009 Location: Valley Village, CA Posts: 87	6LE Muffler Deletes with Double Walled SS Tips... Thanks to Derek (transambandit) for the use of his GORGEOUS 2010 CGM 2SS we developed a muffler delete today that uses 4" DOUBLE WALL stainless steel tips (only other company that makes these tips is Magnaflow and DEALER cost is $150 EACH). Still setting up the jig for production so I don't know pricing yet but we'll offer them with and without tips in aluminized or stainless steel piping and will come with all the clamps so Joe Blow can do this in his own drive way... Here's some sound clips... Here you can see our new splitter as well... Thanks again Derek! If you're interested in buying just go to our site www.6LITEREATERDESIGNS.com click 2010 Camaro and Exhaust. You'll find we our priced lower than the competition but the quality is the same if not better Thanks for looking !

10-31-2009, 09:41 AM	#2
towmoe Drives: IBM 2010 Camaro Join Date: Dec 2008 Location: OKC Posts: 462	Looks and sounds good, but I would caution you here. Not too long ago another company was doing the same type of thing. When I saw the prices I was like . They were charging a price very close to what I could get a Magnaflow Comp series axle-back setup for. There was no way I was going to pay that much for a non-mandrel bent, non-stainless muffler delete set-up. I could go to my local muffler shop and get it done for half the cost. You're competition is not the big guys but the local muffler shops. Just a word of advice. __________________ 2SS/M6 \| Imperial Blue Metallic \| White Stripes \| Black Int

10-31-2009, 10:59 AM	#3
JHart I haz camaro again :) Drives: 2010 Chevrolet Camaro 1SS Join Date: Mar 2009 Location: Union, South Carolina Posts: 660	yeah i've been priced at i think 140 bucks, that's with stainless tips, from my local shop. __________________ 2010 Camaro 1SS(back in a camaro again, yessssss!) 2010 silverado z71 ccsb(sold, old dd) 2010 camaro1ss(sold, missed, will have another someday)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
Muffler delete tips question	96rss/ls6	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	15	08-03-2009 06:38 PM
Good tips for the MUFFLER DELETE?	LDGn63	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	06-25-2009 09:48 PM
(Request) SS muffler delete in car sound clips	BL202	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	3	06-20-2009 08:22 AM
loooking to put a louder muffler on my ss	camarossrs2150	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	11	06-19-2009 10:03 AM

10-31-2009, 01:21 PM	#4
BlaSSt Off Drives: 2SS/RS Join Date: May 2009 Location: Texas Posts: 586	My local muffler shop did mine and used the factory tips but rotated them so they look better and only charged me $80...

10-31-2009, 03:42 PM	#5
6LITEREATER Drives: 1998 Camaro Z28 NBM Join Date: Jul 2009 Location: Valley Village, CA Posts: 87	I feel you. When I started to get this made I thought the same thing. Then when all of it is added up, unfortunately this is the price. My business is not my source of income. I'm actually a working actor (you can see me as "Officer Blake" on General Hospital and recurring on this season's Scare Tactics) and run an apartment complex. I make and sell car parts just because I enjoy it. I tack a little profit on just to put money back into making new parts. Long story short, my exhaust guy is paid, jig is paid for, etc... so if they sell they sell if they don't they don't. The part that makes mine more expensive (cost wise for me) is: All American Made (I could farm the tips over seas and pay $30 instead of $100 but F that)... Mandrel Bent (so of course they charge me more) Stainless Band Clamps (cost 5 times a normal u clamp) Not to mention paypal fees etc... SO, without a doubt, a local shop could do it cheaper but for those who want to do it themself in their driveway I'm trying to offer the cheapest alternative possible. Or someone who wants the shop to do it but wants to know they have quality parts on their $40,000 car...

10-31-2009, 09:03 PM	#6
DaddySS Kept The Faith Drives: 2011 Camaro SS Convertible Join Date: Jan 2007 Location: Bergen County, New Jersey Posts: 418	Nice looking piece, nice job Mark!