Gauges fail to change with driver mode select

Schlok · 12-01-2013, 07:18 PM

So when cycling from one mode to another say Eco to Sport or Track the display should change, however mine does not. Anyone see this happen? Been like this for a couple of weeks, haven't had time to take the car in to get it looked at.

Liltrekkie · 12-01-2013, 07:48 PM

Under the DIC menu (forgot what it's actually called) There is an option to set default gauge looks for all gauges. Look in the options menu of the DIC to adjust display modes.

If that doesn't work, take it to the dealer.

Glen e · 12-01-2013, 08:14 PM

or you could read the manual - look for "link to drive mode" under settings...

Stingray · 12-02-2013, 08:46 AM

Quote:

Originally Posted by Schlok

So when cycling from one mode to another say Eco to Sport or Track the display should change, however mine does not. Anyone see this happen? Been like this for a couple of weeks, haven't had time to take the car in to get it looked at.

Nothing wrong with your car in regards to mode cycling & linking so need to bring to dealership for that. Besides the manual, check out instructional videos more here: http://www.corvette7.com/forums/showthread.php?t=310866

Schlok · 12-02-2013, 10:28 PM

Quote:

Originally Posted by Liltrekkie

Under the DIC menu (forgot what it's actually called) There is an option to set default gauge looks for all gauges. Look in the options menu of the DIC to adjust display modes.

If that doesn't work, take it to the dealer.

not sure how the default would have magically changed, perhaps gremlins, but I'll give that a try before I take it in. I'm not trying to be a jerk but it's very baffling.

Liltrekkie · 12-03-2013, 12:10 AM

Quote:

Originally Posted by Schlok

not sure how the default would have magically changed, perhaps gremlins, but I'll give that a try before I take it in. I'm not trying to be a jerk but it's very baffling.

All the cars went through strict QC control before they were shipped, so it could have just been an accident from them doing QC checks on the gauges. I have no idea what their QC checklist is/was so I could be very wrong. (Though I hope for your sake and saving a trip to the dealer I'm not)

Schlok · 12-03-2013, 04:09 PM

Quote:

Originally Posted by Liltrekkie

All the cars went through strict QC control before they were shipped, so it could have just been an accident from them doing QC checks on the gauges. I have no idea what their QC checklist is/was so I could be very wrong. (Though I hope for your sake and saving a trip to the dealer I'm not)

magic, it's fixed! the gremlins apparently decided to leave..

12-01-2013, 07:18 PM	#1
Schlok Drives: 2015 Z/28 #397 2022 ZL1 #1799 Join Date: Jul 2009 Location: DC Posts: 521	Gauges fail to change with driver mode select So when cycling from one mode to another say Eco to Sport or Track the display should change, however mine does not. Anyone see this happen? Been like this for a couple of weeks, haven't had time to take the car in to get it looked at.

12-01-2013, 08:14 PM	#3
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	or you could read the manual - look for "link to drive mode" under settings... __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

12-01-2013, 07:48 PM	#2
Liltrekkie Drives: Future C7 Join Date: Sep 2013 Location: Missouri Posts: 20	Under the DIC menu (forgot what it's actually called) There is an option to set default gauge looks for all gauges. Look in the options menu of the DIC to adjust display modes. If that doesn't work, take it to the dealer.