Exhaust Filler with L.E.D s- Corvettemods.com

asptroopa1 · 11-10-2013, 06:42 PM

I ordered this after seeing it on Corvette7.com, and I am very pleased in the way that it looks. I'm not showing these pics for any reason other than letting you see it. If you don't like em, that's cool! If you do it was not hard to hook up- took about an hour. I personally called them because the video that they say you can watch, was not posted yet (due to SEMA) but they were very nice to me and even tried to get the video emailed to me. Is it kind of gimmicky - I guess so, but I'll say this on a cold night like last night, and the smoke from the exhaust and the red LEDS.......a friend behind me said it looked cool.......anyway....just here for your benefit- Thanks Corvette Mods

http://www.corvettemods.com/2014-C7-...el_p_9508.html

Stingray · 11-10-2013, 06:46 PM

That looks awesomely cool all lit up! I also saw that on their site... nice mod.

Does it illuminate always or only when braking?

Glen e · 11-10-2013, 06:50 PM

no thanks..breaks my rule for a mod: looks added on...

but it is neat looking...

however in looking on their site they make this plate without the lights that block the muffs and give you a cleaner looking car...I'll paint it flat black and add it to my mods...ordered .....thanks!

asptroopa1 · 11-10-2013, 07:11 PM

No it is on only when the tail lamps are.....Like I said.....its a no no for some and looks cool for some...I just posted it so you could make your own mind up- I like it better than the rusty looking part without it showing.....

GB EB · 11-12-2013, 09:12 AM

Can you tell me where you tap into for the power for those?
You say it took an hour. What did you have to disassemble to install?

I may be interested in these but want to know the level of difficulty.

thanks-

GunnyG · 11-12-2013, 10:19 AM

^^^^ Good question, that's what I wanted to know as well.

Glen e · 11-13-2013, 11:49 AM

I got the non illuminated one today - the directions tell you to splice the lisc plate positive/neg feed for the lights...does not look too hard...

asptroopa1 · 11-13-2013, 12:15 PM

It says to tap the wires to the lic plate light, but what I did was run the wire under the carbon fiber bottom (take ot two screws and run the wire behind it) and then went to the side read marker light on passenger side- unpop that triangle deal - 5 snaps and then under the marker there are three bolts like 4 mm I think...un did those and found wire- very easy trust me....an hour is the most it will take you

Glen e · 11-13-2013, 10:47 PM

install video for both brushed-non-lit and lit versions here:

http://youtu.be/kTlp7aKtqCs

GB EB · 11-14-2013, 06:34 AM

Quote:

Originally Posted by Glen e

install video for both brushed-non-lit and lit versions here:

http://youtu.be/kTlp7aKtqCs

good video...
except....
it discussed which wires you can use but didn't SHOW them. I don't have the car yet so I am unsure how easy it would be to identify the wires recommended for power.

Glen e · 11-14-2013, 09:03 AM

Very nice - this is the brushed non-lit version - mounts in 15 min, no taking off the bumper, etc - no rattle - finishes what chevy started:

http://americancarcraft.com/i-149188...d-2014-c7.html

asptroopa1 · 11-14-2013, 10:04 AM

I really like this from corvettemods......and they were very nice....

Stingray · 11-14-2013, 10:05 AM

Now, THAT'S a very nice mod! Looks at home on the C7 too.

bnall40 · 01-01-2014, 10:59 PM

The perforated version looks pretty good too.

11-10-2013, 06:42 PM	#1
asptroopa1 asptroopa1 Drives: 2014 Corvette Join Date: May 2013 Location: Little Rock Arkansas Posts: 373	Exhaust Filler with L.E.D s- Corvettemods.com I ordered this after seeing it on Corvette7.com, and I am very pleased in the way that it looks. I'm not showing these pics for any reason other than letting you see it. If you don't like em, that's cool! If you do it was not hard to hook up- took about an hour. I personally called them because the video that they say you can watch, was not posted yet (due to SEMA) but they were very nice to me and even tried to get the video emailed to me. Is it kind of gimmicky - I guess so, but I'll say this on a cold night like last night, and the smoke from the exhaust and the red LEDS.......a friend behind me said it looked cool.......anyway....just here for your benefit- Thanks Corvette Mods http://www.corvettemods.com/2014-C7-...el_p_9508.html Attached Images

11-10-2013, 06:50 PM	#3
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	no thanks..breaks my rule for a mod: looks added on... but it is neat looking... however in looking on their site they make this plate without the lights that block the muffs and give you a cleaner looking car...I'll paint it flat black and add it to my mods...ordered .....thanks! __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

11-12-2013, 09:12 AM	#5
GB EB Drives: 2014 Stingray 2LT/Z51 Join Date: Feb 2010 Location: NAS PENSACOLA, FL Posts: 2,375 View My Garage	Can you tell me where you tap into for the power for those? You say it took an hour. What did you have to disassemble to install? I may be interested in these but want to know the level of difficulty. thanks- __________________ *CAMARO5 CAMARO OF THE WEEK 3/21/11* *1ST PLACE - NAVAL STATION SAN DIEGO CAR SHOW 4/17/11* *PEOPLE'S CHOICE AWARD - SAN DIEGO FREEDOM FESTIVAL CAR SHOW 7/4/11* *TROPHY RECIPIENT - GREATEST SHOW ON TURF 9/11/11* *1ST PLACE MODERN MUSCLE - CORONADO SPEED FESTIVAL 9/23/11* *AWARD OF EXCELLENCE - GOOD GUYS DEL MAR FALL NATIONALS 11/27/11* *1ST PLACE / '82&UP CAMARO/FIREBIRD- FORT WALTON BEACH FF SHOW 2/16/13* BUILD THREAD: http://www.camaro5.com/forums/showthread.php?t=120353 Last edited by GB EB; 11-12-2013 at 06:24 PM.

11-12-2013, 10:19 AM	#6
GunnyG Da WHALE Drives: 2014 Stingray, 2015 Panamera 4 Join Date: Dec 2011 Location: Oceanside, Ca - Originally from KCMO Posts: 8,878 View My Garage	^^^^ Good question, that's what I wanted to know as well. __________________ Project MantaRay...Underway

11-13-2013, 11:49 AM	#7
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	I got the non illuminated one today - the directions tell you to splice the lisc plate positive/neg feed for the lights...does not look too hard... __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

11-10-2013, 06:46 PM	#2
Stingray just can't get enough Drives: a bunch of fast toys... Join Date: May 2012 Location: SoFla Posts: 3,605 View My Garage	That looks awesomely cool all lit up! I also saw that on their site... nice mod. Does it illuminate always or only when braking?

11-10-2013, 07:11 PM	#4
asptroopa1 asptroopa1 Drives: 2014 Corvette Join Date: May 2013 Location: Little Rock Arkansas Posts: 373	No it is on only when the tail lamps are.....Like I said.....its a no no for some and looks cool for some...I just posted it so you could make your own mind up- I like it better than the rusty looking part without it showing.....

11-13-2013, 12:15 PM	#8
asptroopa1 asptroopa1 Drives: 2014 Corvette Join Date: May 2013 Location: Little Rock Arkansas Posts: 373	It says to tap the wires to the lic plate light, but what I did was run the wire under the carbon fiber bottom (take ot two screws and run the wire behind it) and then went to the side read marker light on passenger side- unpop that triangle deal - 5 snaps and then under the marker there are three bolts like 4 mm I think...un did those and found wire- very easy trust me....an hour is the most it will take you

11-13-2013, 10:47 PM	#9
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	install video for both brushed-non-lit and lit versions here: http://youtu.be/kTlp7aKtqCs __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant Last edited by Glen e; 11-14-2013 at 01:38 AM.

11-14-2013, 09:03 AM	#11
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	Very nice - this is the brushed non-lit version - mounts in 15 min, no taking off the bumper, etc - no rattle - finishes what chevy started: http://americancarcraft.com/i-149188...d-2014-c7.html __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant Last edited by Glen e; 11-14-2013 at 10:06 AM.

11-14-2013, 10:04 AM	#12
asptroopa1 asptroopa1 Drives: 2014 Corvette Join Date: May 2013 Location: Little Rock Arkansas Posts: 373	I really like this from corvettemods......and they were very nice....

11-14-2013, 10:05 AM	#13
Stingray just can't get enough Drives: a bunch of fast toys... Join Date: May 2012 Location: SoFla Posts: 3,605 View My Garage	Now, THAT'S a very nice mod! Looks at home on the C7 too.

01-01-2014, 10:59 PM	#14
bnall40 Drives: Z51 3LT, 2009 Pilot, 2012 Ody Tours Join Date: Sep 2013 Location: Muscle Shoals, AL Posts: 113	The perforated version looks pretty good too.