You are browsing camaro5 
 |
|
03-26-2017, 04:55 PM
|
#1 |
 Drives: 2013 camaro SS Join Date: Aug 2016
Location: Texas
Posts: 12
|
Supercharger
Looking to buy the supercharger out of a 2013 zl1..
And everything I need to install it into my SS |
|
|
|
03-26-2017, 05:25 PM
|
#2 |
|
Banned
Drives: Camaro Join Date: Mar 2013
Location: USA
Posts: 2,701
|
Contact Andy at ADM. He has kits with full instructions.
|
|
|
|
|
03-27-2017, 07:26 PM
|
#3 |
   Drives: Z06 wannabe Join Date: Feb 2015
Location: Daytona Beach, FL
Posts: 1,200
|
Yes, trust a guy who went a different route, if you want BOLT ON - LSA.... call ADM.
__________________
Apex Focused
Last edited by QUICRNU; 03-27-2017 at 08:11 PM. |
|
|
|
|
03-28-2017, 09:32 PM
|
#4 | |
|
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,694
|
Quote:
Get the kit and save the headaches... -Don
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
|
|
|
|
|
04-08-2017, 01:40 PM
|
#5 |
 Drives: 2011 Camaro SS2RS, 1970 Camaro SS Join Date: Aug 2015
Location: Milwaukee, WI
Posts: 168
|
I did it without the kit, saved a little bit, but the kit is worth it
Sent from my iPhone using Tapatalk |
|
|
|
|
07-07-2017, 07:31 PM
|
#6 |
|
Drives: Cts-v Join Date: Aug 2014
Location: SoCal
Posts: 15
|
I have a CNC ported supercharger, ported for a 90mm or 102mm throttle body, solid coupler, two piece pulley (2.55, or 2.45 available), new bearings, bypass valve bushings, oil, etc, all rebuilt and tested on an Eaton designed test stand.
|
|
|
|
|
|
|
|
 |
|
|
