BMR tower brace with a CAI intake?

[CDN SS]

Has anyone with the CAI intake mounted the 4 point BMR strut tower brace without any issues?

http://www.bmrsuspension.com/?page=p...&productid=468

TIA

[BMR Sales]

My only concern would be the front driver's side mount having clearance issues with the intake. Depending on how set you are on using that 4-point strut tower brace (STB014) you could also look into using our 2-point strut tower brace (STB013) or our other 4-point strut tower brace (STB016) design we have available. Both the STB013 and STB016 should have no problem clearing the CAI intake.

[CDN SS]

Originally Posted by BMR Sales

My only concern would be the front driver's side mount having clearance issues with the intake. Depending on how set you are on using that 4-point strut tower brace (STB014) you could also look into using our 2-point strut tower brace (STB013) or our other 4-point strut tower brace (STB016) design we have available. Both the STB013 and STB016 should have no problem clearing the CAI intake.

Thanks Kyle, can I return the brace if it won't clear the intake?

[BMR Sales]

Originally Posted by CDN SS

Thanks Kyle, can I return the brace if it won't clear the intake?

Yeah, if you decide to purchase the strut tower brace you linked in the intial post I will take it back if it doesn't fit. Since you are in Canada you would have to ship it back to us but I would take it back without any restocking fee. My one request would be to take some pictures of where the clearance issue is that way we can take a look at it.

[Tate]

Will your two point brace fit a 2011 SS? I like the way it looks.

[TAPSHIFT]

No clearance issue with the STB016 and a K&N intake.

[BMR guy]

Originally Posted by Tate

Will your two point brace fit a 2011 SS? I like the way it looks.

Only early models without the OE mounting holes. Some early 2011's had the carry-over 2010 strut towers without the strut tower brace mounting holes. If this is what you have you can use the STB013 2 point brace.

[NYCamaro001]

No issue on mine with CAI Cold Air Intake...

[JDP Sales]

Originally Posted by NYCamaro001

No issue on mine with CAI Cold Air Intake...

Thanks for the confirmation. That looks great!

Best regards,

Tyler
888-308-6007

[Nitroman28]

Originally Posted by BMR Sales

Yeah, if you decide to purchase the strut tower brace you linked in the intial post I will take it back if it doesn't fit. Since you are in Canada you would have to ship it back to us but I would take it back without any restocking fee. My one request would be to take some pictures of where the clearance issue is that way we can take a look at it.

Any of them work with a Maggie?

[TravisTrout]

I modified my CAI intake around the brace(cut a hole in it). Works great with no issues.

[BMR Sales]

Originally Posted by Nitroman28

Any of them work with a Maggie?

We are still working on designing a strut tower brace that will work with the Maggies and other positive displacement blowers. We have been working on it a while because we want something that isn't too hard to install, function amazingly, and looks as good as it functions. I hope we have it ready to go within the next 3-4 months but it really depends on how busy we are.

[BMR Sales]

Originally Posted by TravisTrout

I modified my CAI intake around the brace(cut a hole in it). Works great with no issues.

The BMR strut tower brace looks good nestled up in taht engine bay. Thanks for posting a picture!

[tman52804]

I'm going to order one of these BMR strut tower braces from JDP today!