06-12-2016, 07:20 PM | #1 |
Drives: 2012 Bumblebee Join Date: Apr 2016
Location: Houston
Posts: 40
|
Got quoted $300 for header installation from HP Motorsports. Good rate?
Hey everyone, I live in the Sugar Land/Houston area and need after market headers taken out and my stock headers put back in, HP Motorsports in Katy near I-10 said they could do it for $300. Is that a good rate? If not, can someone recommend another place that does a good job for a good price?
|
06-12-2016, 08:45 PM | #2 |
Drives: 2018 1SS M6 Join Date: Nov 2014
Location: Houston
Posts: 2,617
|
Give Ripley's Muffler and Brake on FM1960 a call. They installed my muffler deletes and resonated x-pipe for $260. Did a great job, and fast.
|
06-12-2016, 10:33 PM | #3 |
Drives: 2011 L99 SS Join Date: Oct 2014
Location: Texas
Posts: 500
|
I have no personal experience with them. But check out the thread about them, 10 or so below this one.
|
06-13-2016, 07:30 AM | #4 |
Drives: 2011 2SS/RS Join Date: Feb 2014
Location: H-Town
Posts: 1,037
|
Might be worth your time to give KP Racing a call.
They'll probably be more expensive, but sometimes a little extra $$ is totally worth avoiding the potential hassles. Not to say that HP wouldn't do a decent job, but there have (especially as of late) been some pretty serious horror stories about that place. They were a (seemingly) good shop for a while, but it seems that something has happened over the course of the past year or so, and the stories coming out of there make me want to avoid them. KP is gonna be a bit farther of a drive (off BW8 just behind the horse track) and they'll probably be a bit more $$, but they are great folks to deal with. |
06-13-2016, 09:43 AM | #5 | |
Drives: 2012 Bumblebee Join Date: Apr 2016
Location: Houston
Posts: 40
|
Quote:
|
|
06-15-2016, 10:42 AM | #6 |
Drives: Black L99 2SS/RS Join Date: Mar 2014
Location: San Antonio, TX
Posts: 1,862
|
Might wanna read this first before you consider HP
http://www.camaro5.com/forums/showthread.php?t=426907 |
06-15-2016, 04:35 PM | #7 | |
Drives: 2012 Bumblebee Join Date: Apr 2016
Location: Houston
Posts: 40
|
Quote:
|
|
06-15-2016, 09:01 PM | #8 |
H-Town Camaro Club Member
Drives: 17 Hyper Blue Metallic KLR-ZL1 Join Date: May 2009
Location: Pearland Tx.
Posts: 2,035
|
Yep I would stay away from them for sure. The guy that your are talking to at HP is originally from ARD. They were one of the worst in Houston. They have since closed.
__________________
|
06-15-2016, 09:50 PM | #9 |
Drives: 2012 Bumblebee Join Date: Apr 2016
Location: Houston
Posts: 40
|
|
06-15-2016, 09:56 PM | #10 |
Drives: 2011 camaro ss convertible Join Date: Oct 2015
Location: Houston, tx
Posts: 421
|
That wouldn't be a good idea, i gave them a call when i was going to put my headers on and they quoted me 1,500. I will never call them again.
|
06-15-2016, 10:25 PM | #11 |
Drives: Black L99 2SS/RS Join Date: Mar 2014
Location: San Antonio, TX
Posts: 1,862
|
Hey OP.
Honestly dude, just ask someone nicely from the Houston Camaro Car Club here. http://www.camaro5.com/forums/showthread.php?t=104361 I'm sure someone would charge you next to nothing to put these things on, I wish I would've saved my damn money and put them on myself, because that's what a lot of people did. That being said, I wouldn't pay over $250-$300 at most to have the headers put on. Now as far as the tune goes, get yours from Dynosteve, his tune for headers + cai can't be beat. THOUSANDS of people on this site alone have had positive experiences with him sending him a tune through the mail. http://www.camaro5.com/forums/showthread.php?t=443495 |
06-16-2016, 03:59 AM | #12 |
Drives: 2018 1SS M6 Join Date: Nov 2014
Location: Houston
Posts: 2,617
|
|
06-16-2016, 06:45 AM | #13 |
Drives: 2015 2SS....white Join Date: May 2015
Location: Katy, TX
Posts: 527
|
Pm sent......
__________________
2015 Summit White 2SS/RS with NPP.... Roto-Fab intake....Phastek lowering springs....BMR strut brace....custom cut blower cam and tune by Matt Sorian.....@MSTuning...BTR valve train....stainless power longtubes with HF cats....Phastek supplied
|
06-16-2016, 09:57 AM | #14 |
Drives: 2011 camaro ss convertible Join Date: Oct 2015
Location: Houston, tx
Posts: 421
|
Yes just to install them ! Not only that but when i first got my car the first ting i wanted to do was make it sound like a muscle car should sound which at times i had do idea of what a catback was or didn't know about this page or didn't know about anything about cars at all ! All i wanted was a loud car so i took it to them and charged me 980 just for an x pipe, magnaflows and hangers all made of stainless steel. Most of the catback was still stock pipe. This is the price of a full aftermarket catback ! Now that I know more about this i can't believe I paid that much and I can't believe they charge that much. I would never take my car to ripleys again
|
|
|