12-06-2020, 02:37 PM | #1 |
66,144 hrs in the making
Drives: 2021 ZL1 Riverside Blue Join Date: Oct 2019
Location: League City, TX
Posts: 42
|
Looking For ZL1 Carbon Fiber Exterior Accessories
Greetings!
I'm looking at buying a 2021 ZL1 and am wanting to replace the splitter, side skirts, and rear diffuser with carbon fiber. Everywhere I'm reading states that they fit all models BUT the ZL1 including C7, Anderson, and ACS. Anderson has splitter and diffuser, C7 has splitter, but I cant find anywhere that sells side skirts in CF, let alone a set or bundle. I'm trying to find a matching set and none of my devices are working with the search functions. Help or references would greatly help. Last edited by Doc_Scott_PT; 12-06-2020 at 04:01 PM. |
12-09-2020, 12:11 PM | #2 |
Drives: Camaro Join Date: Sep 2020
Location: Easton, PA
Posts: 117
|
That would be because the side-skirts are molded into the rocker panels. The "sideskirts" are conveniently made to look separate by making a body line in between the rocker and the "skirt" but it is actually one piece that goes all the way up to the body line right in front of the back rear well. They are a pain the the ass to replace or change. If your stuck on this option you will have to get the bottom half of them either dipped or wrapped in 6d authentic carbon wrap and probably some protection like clear braw over it if you want it to stay in decent shape. I wouldn't recommend it as to take the entire rocker panel off both sides you risk breaking half the clips and then even if you don't you risk damaging under the car because you need to use a metal clip remover to get half of them out. The process is a pain in the butt, I would recommend going to a wrap shop and see if they have authentic 6d carbon fiber to swap the bottom half in which would technically be called the skirt and see if they can clear braw over it for protection.
|
12-09-2020, 12:13 PM | #3 |
Drives: Camaro Join Date: Sep 2020
Location: Easton, PA
Posts: 117
|
If you really want them removed you can buy aftermarket a authentic zl1 rocker without the side-skirt portion and then you can buy the side-skirts from zl1 addons which would directly fit onto the zl1 without the skirts molded into them. From the factory it is not an option but for some reason they have the rockers without the side-skirts on their site under a different part number.
|
12-09-2020, 12:48 PM | #4 |
Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009
Location: Tampa
Posts: 5,110
|
Have you checked with Trufiber.com?
__________________
Sold 2012 2LT RS 12.3@112 old setup
Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 ** Born 3/17/17**Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. **807hp/762tq on 93 gas** and **848hp/792tq on e47** Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive |
|
|
Post Reply
|
|
|