03-11-2018, 03:17 AM | #1 |
Tire and Rims
Hello I need a little help with some tires and rims. I have picked out the rims I want to go on my 2012 2SS/RS, they are the MRR Z28 replicas rim, in 20x10 for the front and 20x11 for the rear. I found the size guild done by Nine Ball here , is gives the sizes that should work with my car.
The question I have is on the front with the 20x10 I would like to put Nitto NT420s in 285 /40 R20, and for the rear 20x11 I would Nitto NT555 G2 315 /35 R20. I would like to know if they will fit without issues, or if there is a e better setup for those rims? Thank y'all for the help and info |
|
03-18-2018, 02:03 PM | #2 |
Drives: 2010 Camaro SS Procharger manual Join Date: Jun 2017
Location: Puerto Rico
Posts: 2
|
I would do 555s all the way. Why mix them
|
03-20-2018, 04:17 PM | #3 |
BAGHEERA
Drives: 2014 Chevrolet Camaro 1LT Join Date: Mar 2016
Location: Los Angeles, CA
Posts: 46
|
I agree with what he says, do the 555s all the way around. I will say though, 40 in the front, 35 in the rear, you're gonna have a good size gap in the rear. I have 275/35/19 all the way around and I have to drop my back even lower to not have a massive wheel gap. Personally, I don't think you'll have any fitment issues other than a wheel gap - if you're already lowered I don't think you'll have an issue.
__________________
FUELENT // Awesome Car Content for All Car Enthusiasts!
Bagheera the '14 1LT Camaro // Follow the build on Instagram @Bagheera_TheCamaro |
03-23-2018, 04:44 AM | #4 |
It's a good thing to try
|
|
|
|
|
|