CEL heeeeelp - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ohten · 07-31-2011, 12:03 PM

I have a Vararam intake and the clamp that holds the maf sensor harness to the radiator hose got loose and contacted my power steering pulley.Two wires were damaged,I have made repairs to the wires but still have a CEL.The codes are P2534 and P069E,does any one have a clue as to what these are and how to correct it.

I have tried disconnecting the battery and still have them.Also car runs like crap.

bmorecam · 07-31-2011, 12:36 PM

Press your onstar button and ask them what does the code come back as and they will tell you. Post back and let us know what the code refers to.

camaro1 · 07-31-2011, 12:56 PM

codes will not clear just from disconnecting the battery,, you need a scan tool, also there is a 12v power wire in the maf harness, you may have blown the fuse that powers the maf (under hood fuse block, fuse #14, should be a 7.5 amp fuse)

cowboy1948 · 07-31-2011, 01:05 PM

Quote:

Originally Posted by Ohten

I have a Vararam intake and the clamp that holds the maf sensor harness to the radiator hose got loose and contacted my power steering pulley.Two wires were damaged,I have made repairs to the wires but still have a CEL.The codes are P2534 and P069E,does any one have a clue as to what these are and how to correct it.

I have tried disconnecting the battery and still have them.Also car runs like crap.

Code P2534 means, Ignition 1 switch circuit low voatage.
Code P069E means, Fuel pump control mdule requisted MIL illumination.
Is this a V6 or V8.

BowlingSS · 07-31-2011, 02:19 PM

Quote:

Originally Posted by cowboy1948

Code P2534 means, Ignition 1 switch circuit low voatage.
Code P069E means, Fuel pump control mdule requisted MIL illumination.
Is this a V6 or V8.

I think his sig says V8.

Bill

Ohten · 07-31-2011, 02:33 PM

Quote:

Originally Posted by camaro1

codes will not clear just from disconnecting the battery,, you need a scan tool, also there is a 12v power wire in the maf harness, you may have blown the fuse that powers the maf (under hood fuse block, fuse #14, should be a 7.5 amp fuse)

Going to check fuse,thanks.

Ohten · 07-31-2011, 02:34 PM

Quote:

Originally Posted by cowboy1948

Code P2534 means, Ignition 1 switch circuit low voatage.
Code P069E means, Fuel pump control mdule requisted MIL illumination.
Is this a V6 or V8.

V8-L99

Ohten · 07-31-2011, 02:45 PM

Replaced fuse,cleared codes w/SCT scanner,CEL is gone.You guys are the greatest.

Thanks.

Z28Taxman · 08-30-2011, 03:28 PM

I just had mine in the shop for those exact 2 codes. Turned out to be a short that blew a fuse.

It also caused a code for skip shift low voltage and caused the reverse lockout to lock me out of reverse.

Warrantee took care of it and we're back, good as new!

07-31-2011, 12:56 PM	#3
camaro1 Drives: 550+RWHP 2010 camaro Join Date: Sep 2007 Location: wisconsin Posts: 1,588	codes will not clear just from disconnecting the battery,, you need a scan tool, also there is a 12v power wire in the maf harness, you may have blown the fuse that powers the maf (under hood fuse block, fuse #14, should be a 7.5 amp fuse) __________________ 415ci stroker, TVS 2300 Magnacharger, cnc heads, cam, yank ss3200 converter, Kooks long tubes, Bwoody true cold air kit, ZL1 Pump, magnaflow 3" cat-back, lowering springs,BMR control arms and tie rod bars, 3.73 gears, diff mounts, RX can, ADM fuel controller

07-31-2011, 02:45 PM	#8
Ohten Drives: Granite Crystal Challenger SRT Join Date: Jan 2010 Location: West Palm Beach,FL by way of Akron,OH Posts: 1,406 View My Garage	Replaced fuse,cleared codes w/SCT scanner,CEL is gone.You guys are the greatest. Thanks. __________________

08-30-2011, 03:28 PM	#9
Z28Taxman Drives: Black 99 Z28 Black '10 SS/RS Join Date: Jul 2009 Location: Lebanon, Pa Posts: 95	I just had mine in the shop for those exact 2 codes. Turned out to be a short that blew a fuse. It also caused a code for skip shift low voltage and caused the reverse lockout to lock me out of reverse. Warrantee took care of it and we're back, good as new! __________________ 99 Black Z28 '10 Black 2SS/RS on order 7/3/09, Delivered 9/21

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Long tube's and CEL	bmorecam	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	26	03-09-2011 08:17 PM
Cure for the CEL ?!	5thGENv6	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	27	02-12-2011 07:13 AM
One possible solution to CEL P0430 w/ JBA midpipes	Goliath	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	01-10-2011 07:55 PM
Another LT Headers and CEL for Emissions	kauffjd3	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	7	10-29-2010 02:54 PM
Clearing a CEL	jtzako	5th Gen Camaro SS LS LT General Discussions	8	07-09-2010 01:37 PM

07-31-2011, 12:03 PM	#1
Ohten Drives: Granite Crystal Challenger SRT Join Date: Jan 2010 Location: West Palm Beach,FL by way of Akron,OH Posts: 1,406 View My Garage	CEL heeeeelp I have a Vararam intake and the clamp that holds the maf sensor harness to the radiator hose got loose and contacted my power steering pulley.Two wires were damaged,I have made repairs to the wires but still have a CEL.The codes are P2534 and P069E,does any one have a clue as to what these are and how to correct it. I have tried disconnecting the battery and still have them.Also car runs like crap. __________________

07-31-2011, 12:36 PM	#2
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	Press your onstar button and ask them what does the code come back as and they will tell you. Post back and let us know what the code refers to.