BMR Coolant resevoir came in today

[Fishinfirefighter]

Originally Posted by Deke736

It's not a pressurized system, so unless they put the outlet hole at the top of the tank above the water line, that shouldn't be a problem.

Thanks for the drain info. I'm disappointed to hear it's only 3/8". I was hoping for at least 5/8" to match the -10AN fittings.

Im sure they will do a larger drain if you want it, Tom told me theyre built to order so it shouldnt be an issue. I went with -12 and am upgrading the entire system to -12 hose and fittings, they even offer -14 in/out but that seems extreme considering the brick and hx restrictions.

[Deke736]

Originally Posted by Fishinfirefighter

Im sure they will do a larger drain if you want it, Tom told me theyre built to order so it shouldnt be an issue. I went with -12 and am upgrading the entire system to -12 hose and fittings, they even offer -14 in/out but that seems extreme considering the brick and hx restrictions.

That's good to know! The D3 tank only has a 3/8" and if I am draining with the pump on it will overflow due to the small drain size. All of my lines are 5/8, so I may go that route if it's a custom build! Thanks for the info!

[479ls3]

Does anyone have more pics of the Might Mouse relocation with the BMR reservoir?