17" Weld RTS fitment

RED 2012 · 10-28-2013, 08:56 PM

I have a Weld RTS set up for drag racing that I used on my 2012 Camaro with 17x5 skinnies and 17x10 rears.

Does anyone know if this same set up can be used on my 2014 z51 Corvette without any issues?

GQ4Life · 10-29-2013, 08:10 PM

probably not because of the offset..
corvette fronts are what fit in rear of camaro because of different offsets

Erik@lashway · 11-02-2013, 04:51 AM

I have verified on our own vehicle...

Front 17's will clear - Medium pad height wheels or larger. The hub is the wrong size though and requires a hubcentric ring to be installed.

Rear 17's DO NOT clear.

10-28-2013, 08:56 PM	#1
RED 2012 Drives: 2000 Camaro SS, 2012 2SS/RS Join Date: Aug 2011 Location: Houston Posts: 93	17" Weld RTS fitment I have a Weld RTS set up for drag racing that I used on my 2012 Camaro with 17x5 skinnies and 17x10 rears. Does anyone know if this same set up can be used on my 2014 z51 Corvette without any issues?

10-29-2013, 08:10 PM	#2
GQ4Life Drives: 2010 Camaro SS LS3 Join Date: Aug 2009 Location: Fishkill, NY Posts: 5,211 View My Garage	probably not because of the offset.. corvette fronts are what fit in rear of camaro because of different offsets __________________ 2015 Corvette Z06.. Lime Rock Park 1:01; Watkins Glen 2:14; Thompson Speedway 1:21

11-02-2013, 04:51 AM	#3
Erik@lashway Drives: Camaros, Vettes, Trucks Join Date: Dec 2010 Location: Fort Lauderdale, FL Posts: 941	I have verified on our own vehicle... Front 17's will clear - Medium pad height wheels or larger. The hub is the wrong size though and requires a hubcentric ring to be installed. Rear 17's DO NOT clear.