Gen6 Camaro 2016 SS ACS-T6 Splitter Introduction

ACS Composite · 06-05-2016, 02:30 PM

Gen6 Camaro 2016 SS ACS-T6 Splitter, Pn 48-4-001

The ACS T6 SS Splitter, Driven by you the Camaro enthusiast our design engineers were up to this challenge. The composite splitter is durable and functional while being very driver friendly. Form and function walk hand-in-hand with the new T6 Splitter. At speed the splitter works to move air gracefully around the while creating downforce. As an added bonus the Splitter gives your Camaro an added touch of character.

A raised central area is evident, and present for two reasons. It will help driving over steep driveways, and most importantly improve the airflow of the horizontally mounted transmission cooler. For those that love to adorn the car themselves. You will be pleased to know that installation is less than 15 minutes; installation is simple and utilizes all the stock mounting bolts. Fits all 2016 Camaro SS front fascias.

ACS engineers understand that you own an American Icon. The Chevrolet Camaro is without a doubt one of most preeminent cars in the American Muscle Car Lineup! We took legend and gave it just a little more punch, but we don’ t have to tell you what the car is, you drive this legend every day!

Winglets have over the last few decades been used by both commercial and corporate jets. Jet designers have long known that airflow off the end of a wing caused drag. With the implementation of the winglet airflow is dramatically improved. Same principal applies to the latest Camaro Winglets / Deflectors line.

Optional Endcaps; Winglets / Deflectors:

Splitter can be selected with no endcaps for a clean elegant options if deflectors are not your thing.

Our S2, are the smallest and conservative option. For aero-performance and a bold look, the S3 is the choice to consider. Deflectors are interchangeable via two bolt to the splitter, and an added 3 in the wheel-liner for the S3.

Application Guide

Camaro SS 2016-17 Coupe, Convertible.

Gen6 Camaro 2016 SS ACS-T6 Splitter, Pn 48-4-001

Gen6 Camaro 2016 SS ACS-T6 Splitter, Pn 48-4-001

Installation Video

https://youtu.be/4CUrlxSftiM

SS 1LE · 06-06-2016, 08:11 AM

Picture installed without the winglets?

KMPrenger · 06-06-2016, 09:13 AM

I commented in your other thread that without the winglets at all, it looked a bit wonky to my eyes, but the tall winglets were way too much.

Really glad to see you guys are offering the shorter winglets too. Good stuff.

ACS Composite · 06-06-2016, 10:26 AM

Quote:

Originally Posted by SS 1LE

Picture installed without the winglets?

Here you go

ACS Composite · 06-06-2016, 11:48 AM

Correct.

Quote:

Originally Posted by CreativeDawn

Very nice design.

So basically if I order this, I don't have to make any holes in the car correct? It's a simple install of screwing in to the already there OEM holes.

A_Work_Of_Art · 06-06-2016, 10:26 PM

Great product, definitely considering getting this

Phidelt59 · 06-06-2016, 11:08 PM

Pricing and availability?

1hevy_chevy · 06-07-2016, 08:39 AM

Please show us the spoiler from as many angles as you can!!!!!! I'm too excited

gprox_69 · 06-07-2016, 09:13 AM

do you have any actual pics of the splitter with and without the winglets? i am actually confused as to which of the two i am getting. If you have any, can you please post, it will surely help me make up my mind. thanks!! V8 or V6 model wont matter as long as i have a comparison with and without the winglets. Thank you.

BradfordCamaro · 06-07-2016, 10:05 AM

Quote:

Originally Posted by Phidelt59

Pricing and availability?

How about clicking on the links?

ACS Composite · 06-16-2016, 09:00 PM

Installation Video for the 48-4-001 Splitter

https://youtu.be/4CUrlxSftiM

BradfordCamaro · 06-16-2016, 09:43 PM

Fathers day sale?

ACS Composite · 06-16-2016, 10:53 PM

Quote:

Originally Posted by BradfordCamaro

Fathers day sale?

No sales planned, instead of inflating prices and then sharing periodic discounts I always felt offering a consistent quality at a fair price to be a better business model for us. Nothing worse than shopping for a part only to realize if you would have waited an extra day would have resulted in a better price.

This being said, if you are interested in aero-pack, including a few of our parts, we can build a custom pack for you.

Reach out to use for a custom quote.

Richard0nee · 07-13-2016, 05:18 PM

Quote:

Originally Posted by ACS Composite

Here you go

Love this look of the splitter without the winglet.

Btw, how come there are two different splitters on the site with the same part number?

The splitter on the red model is not the one I want lol

I'm guessing there are different winglets..
http://www.phastekperformance.com/20...r-48-4-001.htm

need a rear splitter to offset the side and fronts!

06-05-2016, 02:30 PM	#1
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,254	Gen6 Camaro 2016 SS ACS-T6 Splitter Introduction Gen6 Camaro 2016 SS ACS-T6 Splitter, Pn 48-4-001 The ACS T6 SS Splitter, Driven by you the Camaro enthusiast our design engineers were up to this challenge. The composite splitter is durable and functional while being very driver friendly. Form and function walk hand-in-hand with the new T6 Splitter. At speed the splitter works to move air gracefully around the while creating downforce. As an added bonus the Splitter gives your Camaro an added touch of character. A raised central area is evident, and present for two reasons. It will help driving over steep driveways, and most importantly improve the airflow of the horizontally mounted transmission cooler. For those that love to adorn the car themselves. You will be pleased to know that installation is less than 15 minutes; installation is simple and utilizes all the stock mounting bolts. Fits all 2016 Camaro SS front fascias. ACS engineers understand that you own an American Icon. The Chevrolet Camaro is without a doubt one of most preeminent cars in the American Muscle Car Lineup! We took legend and gave it just a little more punch, but we don’ t have to tell you what the car is, you drive this legend every day! Winglets have over the last few decades been used by both commercial and corporate jets. Jet designers have long known that airflow off the end of a wing caused drag. With the implementation of the winglet airflow is dramatically improved. Same principal applies to the latest Camaro Winglets / Deflectors line. Optional Endcaps; Winglets / Deflectors: Splitter can be selected with no endcaps for a clean elegant options if deflectors are not your thing. Our S2, are the smallest and conservative option. For aero-performance and a bold look, the S3 is the choice to consider. Deflectors are interchangeable via two bolt to the splitter, and an added 3 in the wheel-liner for the S3. Application Guide Camaro SS 2016-17 Coupe, Convertible. Gen6 Camaro 2016 SS ACS-T6 Splitter, Pn 48-4-001 Gen6 Camaro 2016 SS ACS-T6 Splitter, Pn 48-4-001 Installation Video https://youtu.be/4CUrlxSftiM Last edited by ACS Composite; 09-09-2016 at 11:57 AM.

06-06-2016, 09:13 AM	#3
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	I commented in your other thread that without the winglets at all, it looked a bit wonky to my eyes, but the tall winglets were way too much. Really glad to see you guys are offering the shorter winglets too. Good stuff. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

06-06-2016, 10:26 PM	#6
A_Work_Of_Art Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Guam Posts: 31	Great product, definitely considering getting this __________________ \| 2SS Camaro \|Garnet Red\| Adrenaline Red\| NPP\| MRC\| 6SPD\| CAI Intake\| Mishimoto CC\|

06-06-2016, 11:08 PM	#7
Phidelt59 Drives: 2016 Camaro SS Join Date: Feb 2013 Location: Pensacola, FL Posts: 194 View My Garage	Pricing and availability? __________________ Camaro 2SS Hyper Blue Metallic/Kalahari 6M, NPP, MRC, NAV Black 5 Spoke

06-07-2016, 09:13 AM	#9
gprox_69 Drives: 2LT/RS v2.0 & 2016 2SS Join Date: Jul 2013 Location: RAZORBACK nation: ARKANSAS Posts: 68 View My Garage	front splitter on V6 do you have any actual pics of the splitter with and without the winglets? i am actually confused as to which of the two i am getting. If you have any, can you please post, it will surely help me make up my mind. thanks!! V8 or V6 model wont matter as long as i have a comparison with and without the winglets. Thank you.

06-06-2016, 08:11 AM	#2
SS 1LE マスタング = 遅い Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015 Location: Florida Posts: 7,061	Picture installed without the winglets?

06-07-2016, 08:39 AM	#8
1hevy_chevy Drives: Nightfall Gray 2016 6M 2SS Join Date: Jul 2014 Location: Miami Fl Posts: 415 View My Garage	Please show us the spoiler from as many angles as you can!!!!!! I'm too excited

06-16-2016, 09:00 PM	#11
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,254	Installation Video for the 48-4-001 Splitter https://youtu.be/4CUrlxSftiM Last edited by ACS Composite; 06-16-2016 at 09:18 PM.

06-16-2016, 09:43 PM	#12
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Fathers day sale? __________________

User Name		Remember Me?
Password