New ACS Gen6 Camaro Fender Insert, 48-4-017

ACS Composite · 05-08-2017, 06:20 PM

Just off the presses, we are sharing our latest Gen6 Camaro part.

The ACS Fender insert, with integrated LED Sidemarker.
Pn 48-4-017

The ACS fender inserts mark our first of many Spring/Summer product releases for the 6th Generation Camaro. The insert is fully functional by allowing airflow to pass through. Additionally, the LED side marker interacts with the turn signal for enhanced lane switching safety, and flashes when locked/unlocked.

The ACS Fender Inserts are molded in ABS-PC plastic creating a flawless component every time. The fender inserts can be painted to color match your Camaro or ordered in our Gloss Black finish, which will match our current 6th Generation paint options.

Oh, and did we forget to mention that it ships for free?

Available in 2 finishes

Primer (to be painted)
Gloss Black

The kit is included with following items:

Outer Fender Panel, Driver Side
Inner Fender Panel, Driver Side
Outer Fender Panel, Passenger Side
Inner Fender Panel, Passenger Side
Driver Side LED Side Marker
Passenger Side Side Marker
Windshield washer bottle carbon wrap
Touch up paint
Digital Templates
12 Speed Washer

https://cdn.shopify.com/s/files/1/10...g?v=1494257490

More info and details can be found on our site

https://acscomposite.com/collections...r-insert-w-led

PackersFan26 · 05-08-2017, 07:04 PM

Stupid question, but the front quarter panels need to be cut to allow these to fit correct?

ACS Composite · 05-08-2017, 07:11 PM

Quote:

Originally Posted by PackersFan26

Stupid question, but the front quarter panels need to be cut to allow these to fit correct?

Valid question, yes, front fender to need to be trimmed.

HallsDesign · 05-08-2017, 07:40 PM

I'm getting these on payday!

BradfordCamaro · 05-08-2017, 07:48 PM

Trimmed. Hahahaha.

I think they are pretty neat...
..but.
The ACS tags right on the side??? No thanks. :(

FNxR3DNECK · 05-08-2017, 08:16 PM

Quote:

Originally Posted by BradfordCamaro

Trimmed. Hahahaha.

I think they are pretty neat...
..but.
The ACS tags right on the side??? No thanks. :(

To be fair that part is shaped the same as the fender badges that come on the car so you can place those over the ACS logos, but if you're one of those that don't like fender badges then idk.

My only issue with it is I wish the curved part followed the curve of the fender better.

MGD · 05-08-2017, 08:42 PM

Sure, the you click it, it shows "Page can not be Found"
More info and details can be found on our site

https://acscomposite.com/products_pr...8f5d1820cd3b67

RobertAvitia · 05-08-2017, 11:40 PM

I need more pictures

USAFS197 · 05-09-2017, 12:26 AM

Those aren't too bad. I think they could be improved if they were taller--akin to the C7 and C7Z style ones. Although I see that the shape of the fender makes it more difficult to mold.

G Fo12ce · 05-09-2017, 08:06 AM

Whitemaro6 · 05-09-2017, 09:02 AM

I cant tell if it is the picture but nothing looks straight. The curv of the vent should match the wheel. The whole thing looks like it was installed angled to far forward. None of the angles or lines match anything on the car........

chrest · 05-09-2017, 09:35 AM

Quote:

Originally Posted by Whitemaro6

I cant tell if it is the picture but nothing looks straight. The curv of the vent should match the wheel. The whole thing looks like it was installed angled to far forward. None of the angles or lines match anything on the car........

this is the first thought i had. there seems to be no rhyme or reason to them besides the top lines being parallel to the ground and the bottom following that body line.... the vertical angles should flow with something IMO

init4fun · 05-09-2017, 09:36 AM

Quote:

Originally Posted by Whitemaro6

I cant tell if it is the picture but nothing looks straight. The curv of the vent should match the wheel. The whole thing looks like it was installed angled to far forward. None of the angles or lines match anything on the car........

I agree. Nothing matches. The top of the vent appears to be angled down but this could just be the picture. The rear doesn't match the curve of the door and the front doesn't match the curve of the wheel opening.

If it wasn't for the fact that the bottom line matched the contour of the body line I would say that these where for a different car.

Sorry to those that like these but to me it reminds me of the Honda crowd.

Darth Martel · 05-09-2017, 09:55 AM

I like the concept but, the execution needs some rework. As is, it's not for me.

05-08-2017, 06:20 PM	#1
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,254	New ACS Gen6 Camaro Fender Insert, 48-4-017 Just off the presses, we are sharing our latest Gen6 Camaro part. The ACS Fender insert, with integrated LED Sidemarker. Pn 48-4-017 The ACS fender inserts mark our first of many Spring/Summer product releases for the 6th Generation Camaro. The insert is fully functional by allowing airflow to pass through. Additionally, the LED side marker interacts with the turn signal for enhanced lane switching safety, and flashes when locked/unlocked. The ACS Fender Inserts are molded in ABS-PC plastic creating a flawless component every time. The fender inserts can be painted to color match your Camaro or ordered in our Gloss Black finish, which will match our current 6th Generation paint options. Oh, and did we forget to mention that it ships for free? Available in 2 finishes Primer (to be painted) Gloss Black The kit is included with following items: Outer Fender Panel, Driver Side Inner Fender Panel, Driver Side Outer Fender Panel, Passenger Side Inner Fender Panel, Passenger Side Driver Side LED Side Marker Passenger Side Side Marker Windshield washer bottle carbon wrap Touch up paint Digital Templates 12 Speed Washer https://cdn.shopify.com/s/files/1/10...g?v=1494257490 More info and details can be found on our site https://acscomposite.com/collections...r-insert-w-led Last edited by ACS Composite; 05-08-2017 at 11:55 PM.

05-08-2017, 07:48 PM	#5
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Trimmed. Hahahaha. I think they are pretty neat... ..but. The ACS tags right on the side??? No thanks. :( __________________

05-08-2017, 08:42 PM	#7
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 821	Sure, the you click it, it shows "Page can not be Found" More info and details can be found on our site https://acscomposite.com/products_pr...8f5d1820cd3b67 __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

05-08-2017, 11:40 PM	#8
RobertAvitia BYND GARAGE Drives: 17' 1LT Turbo Join Date: Feb 2016 Location: CA Posts: 667	I need more pictures __________________ https://m.youtube.com/#/c/BEYONDGARAGE http://instagram.com/bynd_ltg

05-09-2017, 12:26 AM	#9
USAFS197 Drives: 2018 Audi TT RS Join Date: Jan 2014 Location: Navarre, Florida Posts: 1,915	Those aren't too bad. I think they could be improved if they were taller--akin to the C7 and C7Z style ones. Although I see that the shape of the fender makes it more difficult to mold. __________________ 2018 Audi TT ▊RS 2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold

05-08-2017, 07:04 PM	#2
PackersFan26 Drives: 2017 Summit White 2SS Join Date: Jan 2017 Location: Dublin, CA Posts: 546	Stupid question, but the front quarter panels need to be cut to allow these to fit correct?

05-08-2017, 07:40 PM	#4
HallsDesign Drives: 1LT RS Join Date: Oct 2016 Location: Sacramento Posts: 81 View My Garage	I'm getting these on payday!

05-09-2017, 09:02 AM	#11
Whitemaro6 Drives: 16 Summit white, Ceramic white 2SS Join Date: Jan 2016 Location: Places Posts: 419	I cant tell if it is the picture but nothing looks straight. The curv of the vent should match the wheel. The whole thing looks like it was installed angled to far forward. None of the angles or lines match anything on the car........

05-09-2017, 09:55 AM	#14
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,496	I like the concept but, the execution needs some rework. As is, it's not for me. __________________ 2016 Black 1SS w/ MRC, low-gloss black wheels, auto trans. Self-created custom Dark Knight Edition accents. Rotofab CAI with dry filter and sound tube delete, PRAY ported intake manifold and throttle body, Texas Speed cam, Stainless Works headers and exhaust, Skid Mark garage E85 kit, JMS fuel pump voltage booster, Circle D torque converter. Custom E85/mod tune by Jannetty Racing.

User Name		Remember Me?
Password