MODS DELETE PLEASE - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

smkeeling · 08-17-2014, 06:44 AM

SELLING MY 499 RWHP 469 RWTQ NA CAMARO. TRANSFORMERS EDITION CAMARO 2SS/RS.

I will post pix on Monday, but if you look in the Mid-Atlantic section local sales you will see a few of the pix I have posted

This car is a blast to drive but as all families do mine is growing and this one has one seat to few. So my loss will be someones lucky gain. I still have the factory wheels and tires for the winter. Camaro has been lowered roughly 1" all the way around. Rides on rails with the new suspension upgrades. I don't drive this car very often, mostly sits in the driveway waiting for the next show, but the miles will go up as I do drive it once a week. Between 2 motorcycles, Chevy Cruze (DD), Suburban (rocking a built LS3 also) and a new boat, the camaro sort of gets left out unless there is a cruze or car show. Fires right up, drives perfect.

List of mods

Engine
Roto Fab CAI $350
Ported / Polished TB $250
Fast 102 intake ported to match the heads $1200 (expensive due to ported to match heads)
Mast Motorsports heads $3500
Mild Cam $350
Yellow Catch Can $150
1 7/8 Stainless Works headers (ceramic coated) $1750
Stainless Works HF Cats $350
Magnaflow Competition Exhaust 3" plus X crossover $1200

Drivetrain
3.91 1LE Rear End Gears $1000
DSS Single PC Drive Shaft $??? (I don't remember)

Suspension
Pedders Super Car Coilovers $4500-$5000
BMR Full Busing Kit $400
Hotchis ZL1 Front and Rear Sway Bar $550
GM Lower Control Arm (Rear ZL1) $???

Exterior
ZL1 Wheels and Tires (factor not aftermarket) $3500
Vertical Door kit $1000-$1200
Ghost Side Markers $225
35% Tint all windows 50% Windshield $360

Misc
Brake fluid changed to DOT 4 $??? I don't remember
Clutch has its own reservoir $150
Upgraded brake lines $125
Dyed the stiching yellow

Looking to get $32,750 obo
NOW $31,500

Shawn
540-797-0783

smkeeling · 08-25-2014, 09:40 AM

Uploading pix

smkeeling · 08-25-2014, 09:42 AM

a few more

smkeeling · 08-25-2014, 09:44 AM

I hope these come as you can see 24MPG HWY and mixed driving 21MPG with 499RWHP.

smkeeling · 08-26-2014, 04:38 PM

Bump

smkeeling · 09-02-2014, 07:20 PM

TTT

smkeeling · 09-05-2014, 05:23 PM

TTT

smkeeling · 09-08-2014, 12:55 PM

Suspension pix

smkeeling · 09-08-2014, 12:57 PM

More pix

smkeeling · 09-08-2014, 12:59 PM

last of the pix

smkeeling · 09-10-2014, 07:53 PM

Ttt

smkeeling · 09-14-2014, 08:20 AM

Bump

smkeeling · 09-22-2014, 08:54 AM

Going to the dealership as a trade, so dumb schmuck is going to get lucky. Mods delete

hnsy · 09-29-2014, 04:51 PM

PM sent

08-17-2014, 06:44 AM	#1
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	MODS DELETE PLEASE SELLING MY 499 RWHP 469 RWTQ NA CAMARO. TRANSFORMERS EDITION CAMARO 2SS/RS. I will post pix on Monday, but if you look in the Mid-Atlantic section local sales you will see a few of the pix I have posted This car is a blast to drive but as all families do mine is growing and this one has one seat to few. So my loss will be someones lucky gain. I still have the factory wheels and tires for the winter. Camaro has been lowered roughly 1" all the way around. Rides on rails with the new suspension upgrades. I don't drive this car very often, mostly sits in the driveway waiting for the next show, but the miles will go up as I do drive it once a week. Between 2 motorcycles, Chevy Cruze (DD), Suburban (rocking a built LS3 also) and a new boat, the camaro sort of gets left out unless there is a cruze or car show. Fires right up, drives perfect. List of mods Engine Roto Fab CAI $350 Ported / Polished TB $250 Fast 102 intake ported to match the heads $1200 (expensive due to ported to match heads) Mast Motorsports heads $3500 Mild Cam $350 Yellow Catch Can $150 1 7/8 Stainless Works headers (ceramic coated) $1750 Stainless Works HF Cats $350 Magnaflow Competition Exhaust 3" plus X crossover $1200 Drivetrain 3.91 1LE Rear End Gears $1000 DSS Single PC Drive Shaft $??? (I don't remember) Suspension Pedders Super Car Coilovers $4500-$5000 BMR Full Busing Kit $400 Hotchis ZL1 Front and Rear Sway Bar $550 GM Lower Control Arm (Rear ZL1) $??? Exterior ZL1 Wheels and Tires (factor not aftermarket) $3500 Vertical Door kit $1000-$1200 Ghost Side Markers $225 35% Tint all windows 50% Windshield $360 Misc Brake fluid changed to DOT 4 $??? I don't remember Clutch has its own reservoir $150 Upgraded brake lines $125 Dyed the stiching yellow Looking to get $32,750 obo NOW $31,500 Shawn 540-797-0783 __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance Last edited by smkeeling; 03-21-2015 at 05:49 AM. Reason: Updates

08-25-2014, 09:40 AM	#2
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	Uploading pix Attached Images __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

08-25-2014, 09:42 AM	#3
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	a few more Attached Images __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

08-25-2014, 09:44 AM	#4
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	I hope these come as you can see 24MPG HWY and mixed driving 21MPG with 499RWHP. Attached Images __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

08-26-2014, 04:38 PM	#5
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	Bump __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-02-2014, 07:20 PM	#6
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	TTT __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-05-2014, 05:23 PM	#7
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	TTT __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-08-2014, 12:55 PM	#8
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	Suspension pix Attached Images __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-08-2014, 12:57 PM	#9
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	More pix Attached Images __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-08-2014, 12:59 PM	#10
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	last of the pix Attached Images __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-10-2014, 07:53 PM	#11
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	Ttt __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-14-2014, 08:20 AM	#12
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	Bump __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-22-2014, 08:54 AM	#13
smkeeling MNSTRBEE Drives: 2010 Transformers 2SS/RS Join Date: Nov 2011 Location: Flint Hill VA Posts: 136	Going to the dealership as a trade, so dumb schmuck is going to get lucky. Mods delete __________________ 2010 BumbleBee 2SS/RS Stainless Works headers 1 7/8, Roto-Fab CAI, Magnaflow 3" cat back exhaust with X-pipe, Ported and polished Mast Motorsports LS3 heads, ported and polished TB, LSXR FAST 102 intake ported to match heads, CAM and Tuned by T&T Performance 498RWHP 468RWTQ still getting 24mpg hwy VDI vertical doors installed by T&T Performance

09-29-2014, 04:51 PM	#14
hnsy Drives: 2011 HPE550 Join Date: Sep 2014 Location: United States Posts: 1	PM sent