Crank position sensor relearn using HPTuners

L78toLT1 · 02-18-2023, 07:34 AM

Does anyone know if the crankshaft position sensor relearn procedure can be accomplished using HPtuners?

laynlo15 · 02-18-2023, 07:57 AM

Not sure, maybe King will chime in on that one.

L78toLT1 · 02-18-2023, 08:03 AM

Quote:

Originally Posted by laynlo15

Not sure, maybe King will chime in on that one.

Yeah, I was thinking of PMing King, but though I'd create a thread for the benefit of the rest of the community. My car is running fine, but I've got the crank relearn fault code.

KingLT1 · 02-18-2023, 09:16 AM

I have never had to perform a crank relearn. So, I am not sure if that feature in HPt works on this platform. I would give it a try and see if it works. If it doesn't you will need to find someone with a tech2 type device I believe.

arpad_m · 02-18-2023, 11:01 AM

Jim, I have a "medium kahuna" D8 scan tool and will check today if it can do crank relearn for GM vehicles. As per the manual, it should be supported. If yes, I can drive over to your humble abode and do the needful if you want, just text me.

JSH · 02-18-2023, 11:48 AM

Quote:

Originally Posted by L78toLT1

Does anyone know if the crankshaft position sensor relearn procedure can be accomplished using HPtuners?

My experience is, I put the car in service mood, flash the ECM/TCM with HPT, exit service mood, it then relearns the crank position when you hit the start button once or twice, then it will start.

L78toLT1 · 02-18-2023, 05:18 PM

Quote:

Originally Posted by arpad_m

Jim, I have a "medium kahuna" D8 scan tool and will check today if it can do crank relearn for GM vehicles. As per the manual, it should be supported. If yes, I can drive over to your humble abode and do the needful if you want, just text me.

Thanks, Arpad. I may take you up on that!

L78toLT1 · 02-18-2023, 06:00 PM

Quote:

Originally Posted by JSH

My experience is, I put the car in service mood, flash the ECM/TCM with HPT, exit service mood, it then relearns the crank position when you hit the start button once or twice, then it will start.

I'm currently remote tuning my car with Ted Jannetty, so my ecm has been reflashed several times and the stubborn crankshaft relearn DCT won't go away. I will run this issue by Ted on Monday when we resume tuning.

02-18-2023, 07:34 AM	#1
L78toLT1 Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017 Location: North Ga Posts: 1,787	Crank position sensor relearn using HPTuners Does anyone know if the crankshaft position sensor relearn procedure can be accomplished using HPtuners? __________________ Baby Blue 2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned

02-18-2023, 07:57 AM	#2
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Not sure, maybe King will chime in on that one. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

02-18-2023, 09:16 AM	#4
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,800	I have never had to perform a crank relearn. So, I am not sure if that feature in HPt works on this platform. I would give it a try and see if it works. If it doesn't you will need to find someone with a tech2 type device I believe. __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

02-18-2023, 11:01 AM	#5
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,618 View My Garage	Jim, I have a "medium kahuna" D8 scan tool and will check today if it can do crank relearn for GM vehicles. As per the manual, it should be supported. If yes, I can drive over to your humble abode and do the needful if you want, just text me. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

User Name		Remember Me?
Password