Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Marketplace > Members Classifieds > Wheels / Tires


BeckyD @ James Martin Chevy


Post Reply
 
Thread Tools
Old 03-17-2017, 08:46 AM   #1
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Vorsteiner VFF-101s SOLD

Reviving this old For Sale thread since I now have 3 sets of wheels/tires which is just ridiculous!

These are the Vorsteiner VFF-101s in 20x10 front & 20x11 rear with Michelin Pilot A/S 3s in 285/30/20 front & 285/35/20 rear. I will include the black center caps as well.

The wheels are in absolutely immaculate condition! No curb rash or any blemishes. I only put a few thousand miles on this setup since it was only on the car through the winter and I didn't drive it much.

Since the wheels run $600-650 each new I think $2000 for everything is a pretty good deal (for everything: wheels/tires & TPMS).

I would like to sell them locally to someone in the DMV area, but would consider shipping at the buyers expense (I have a friend that does freight shipping).

$2000 OBO
Attached Images
  
__________________
IG: @NC_M1SS1LE

Last edited by FNxR3DNECK; 03-17-2018 at 04:16 PM.
FNxR3DNECK is offline   Reply With Quote
Old 03-20-2017, 08:06 AM   #2
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Bump!
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 03-21-2017, 02:12 PM   #3
kropscamaro16


 
kropscamaro16's Avatar
 
Drives: 2016 1ss camaro
Join Date: Feb 2016
Location: 909
Posts: 9,816
these look very similar to my new wheels and almost the same ones i first got! if you wasnt so far away id probably snag em but why did you do 285 all the way around but staggered wheel size?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
kropscamaro16 is offline   Reply With Quote
Old 03-21-2017, 03:06 PM   #4
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Quote:
Originally Posted by kropscamaro16 View Post
these look very similar to my new wheels and almost the same ones i first got! if you wasnt so far away id probably snag em but why did you do 285 all the way around but staggered wheel size?
This was only my cold weather setup so there was no hard driving on them, and frankly 285s are cheaper than 305s haha
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 03-21-2017, 05:54 PM   #5
kropscamaro16


 
kropscamaro16's Avatar
 
Drives: 2016 1ss camaro
Join Date: Feb 2016
Location: 909
Posts: 9,816
haha gotcha and makes sense whats your new setup?
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
kropscamaro16 is offline   Reply With Quote
Old 03-21-2017, 06:24 PM   #6
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Quote:
Originally Posted by kropscamaro16 View Post
haha gotcha and makes sense whats your new setup?
Back to stock 1LE wheels and tires!!! It's Auto X season! And the. I'm thinking about a set of 19s for next winter so I have more tires to chose from.
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 04-03-2017, 11:19 AM   #7
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Bump it again! It's almost time for me to switch back to stock set-up so these will soon be needing a new home!
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 04-06-2017, 01:12 PM   #8
TheElementalCashew
 
TheElementalCashew's Avatar
 
Drives: 2017 ZL1
Join Date: Mar 2017
Location: NH
Posts: 278
Curious as to the offsets you chose. A couple websites where I looked at these seem to think they don't fit the Camaro, and I wouldn't want to change to 305s only to have rubbing.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof

Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325)
Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq

TheElementalCashew is offline   Reply With Quote
Old 04-06-2017, 01:34 PM   #9
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Quote:
Originally Posted by TheElementalCashew View Post
Curious as to the offsets you chose. A couple websites where I looked at these seem to think they don't fit the Camaro, and I wouldn't want to change to 305s only to have rubbing.
From what I understand they just started making these in Camaro appropriate offsets last summer, they were originally for the BMWs (as they have the same bolt pattern) these are 20x10 with 28mm offset and 20x11 with 43 mm offset. As compared to the stock setup on my 1LE or you ZL1 the difference is only 8mm in the front and the same for the rear. So the fronts actually 8mm closer to the center of the car, but I have never had these rub.
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 04-06-2017, 01:47 PM   #10
TheElementalCashew
 
TheElementalCashew's Avatar
 
Drives: 2017 ZL1
Join Date: Mar 2017
Location: NH
Posts: 278
Quote:
Originally Posted by FNxR3DNECK View Post
From what I understand they just started making these in Camaro appropriate offsets last summer, they were originally for the BMWs (as they have the same bolt pattern) these are 20x10 with 28mm offset and 20x11 with 43 mm offset. As compared to the stock setup on my 1LE or your ZL1 the difference is only 8mm in the front and the same for the rear. So the fronts actually 8mm closer to the center of the car, but I have never had these rub.
I appreciate the info. I like this style wheel, but am looking for closer offset to stock. Looks like the ZL1 stock offset is 43mm so that would be ok, but 8mm is quite a bit for the fronts to be pushed in. How concave are the wheels? It is hard to tell from the side pictures.
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof

Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325)
Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq

TheElementalCashew is offline   Reply With Quote
Old 04-06-2017, 01:56 PM   #11
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Quote:
Originally Posted by TheElementalCashew View Post
I appreciate the info. I like this style wheel, but am looking for closer offset to stock. Looks like the ZL1 stock offset is 43mm so that would be ok, but 8mm is quite a bit for the fronts to be pushed in. How concave are the wheels? It is hard to tell from the side pictures.
Pretty damn concave haha there's tons of clearance for the brakes! Those 8mm really don't make much of a difference in the look to be honest, I'm running the same size tire as stock up front (285/30/20) and it still pokes out a little just like the stock setup. I doubt you would be able to go wider than a 285 up front on these though.
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 04-06-2017, 03:03 PM   #12
TheElementalCashew
 
TheElementalCashew's Avatar
 
Drives: 2017 ZL1
Join Date: Mar 2017
Location: NH
Posts: 278
Quote:
Originally Posted by FNxR3DNECK View Post
Pretty damn concave haha there's tons of clearance for the brakes! Those 8mm really don't make much of a difference in the look to be honest, I'm running the same size tire as stock up front (285/30/20) and it still pokes out a little just like the stock setup. I doubt you would be able to go wider than a 285 up front on these though.
Cool, well I am still interested in these without tires, need to ponder for a bit I guess. Pretty good price on them though. Are TMPS and center caps included? I'll be in DC for work with my truck the 22nd-28th, are you anywhere around there?
__________________
2017 Camaro ZL1, Nightfall Gray Metallic: M6, PDR, exposed CF, navigation, sunroof

Mods: Rotofab CAI, Tony Mamo TB, Kooks headers (green cats), 18% LPE lower pulley, E85/FlexFuel sensor. BC Forged RS41s (19x10, 19x12)/PS4S, R888R (305/325)
Dyno: E40: 661whp/703wtq, 93: 633whp/674wtq

TheElementalCashew is offline   Reply With Quote
Old 04-06-2017, 09:13 PM   #13
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
Quote:
Originally Posted by TheElementalCashew View Post
Cool, well I am still interested in these without tires, need to ponder for a bit I guess. Pretty good price on them though. Are TMPS and center caps included? I'll be in DC for work with my truck the 22nd-28th, are you anywhere around there?
The TPMS are installed right now, the $1800 for just wheels was intended to be just the 4 wheels and both sets of center caps (I have red and black ones), idk about the TPMS though they were like $40 each so maybe an extra $100 on top of the wheels?

I am just north of D.C. but I will be down in N.C. from the 20th-28th.
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
Old 03-11-2018, 01:27 PM   #14
FNxR3DNECK


 
FNxR3DNECK's Avatar
 
Drives: 2017 SS 1LE
Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
BUMP!!! Time to finally sell these!!! Looking to sell as a set!
__________________
IG: @NC_M1SS1LE
FNxR3DNECK is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:32 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.