05-25-2017, 03:34 PM | #1 |
Drives: rumble bee,2SS 6sp Join Date: May 2009
Location: pittsburgh, PA
Posts: 539
|
Cut out stopped working but have xpipe
My pass side cutout stopped working but it is after the xpipe. I have headers no cats xpipe and cutouts before the magnaflow mufflers. I assume that having just the one open and the pass side one just goin thru the muffler will be fine?
__________________
blk 2ss 6spd with sunroof.
intake,tsp cam,full exhaust,pcmforless tune,trailing arms,toe rods. hopeing for 11.9 because my g/f said she will take the cam and the suspension back if not. |
05-26-2017, 07:10 PM | #2 |
Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016
Location: Middletown, Ohio
Posts: 2,914
|
You should be fine buddy
__________________
*SOLD*504HP/433TQ | Night Fury cammed Cold Air Inductions intake Bo White ported TB Speed Engineering 1 7/8 longtubes NPP catback QTP low profile cutouts Powerbond 25% UDP 3.73 gears JRE scoop ZL1 grille R1 Concepts drilled/slotted rotors built/tuned by Weapon X Motorsports
|
05-26-2017, 09:28 PM | #3 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
It may not be optimal, but that exhaust will find it's way out, so I wouldn't worry.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7Ί overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160Ί thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
06-04-2017, 10:32 PM | #4 |
Drives: 2011 2SS/RS Victory Red Join Date: Aug 2011
Location: Virginia
Posts: 921
|
The ones on the 68 get clogged up every once and a while. We just bang on them a bit and fire a bunch of wd40 in them. They eventually free up. Exhaust has moisture in it and well, the shaft tend to rust up and hang, plus the carbon doesn't help.
__________________
Updates: BTR Stage 2 VVT Cam Kit w/Smith Brothers Trunnions, Fluidampr, RX catch can, B&M Trans pan mod, Kooks Black Headers, Borla S-tunes, Eibach Multi-Pro-R2 coilovers and Swaybars, BMR Full Bushing kit with Toe and Trailing arms, RB Rotors w/EBC Pads, GForce 1400 Axles (now on order). AVH-X5800BHS in Scosche GM5201AB. |
|
|
|
|