01-07-2013, 08:16 PM | #15 |
Drives: rumble bee,2SS 6sp Join Date: May 2009
Location: pittsburgh, PA
Posts: 539
|
I did the install and did not measure. But it worked great for 5000+miles. It would slightly engage 1" off the floor till fully engaged 1/2"from top. Just like stock.
__________________
blk 2ss 6spd with sunroof.
intake,tsp cam,full exhaust,pcmforless tune,trailing arms,toe rods. hopeing for 11.9 because my g/f said she will take the cam and the suspension back if not. |
01-09-2013, 05:48 AM | #16 | |
Drives: 2017 ZL1 and 2016 GMC Sierra Denali Join Date: Jul 2010
Location: Dubai, United Arab Emirates
Posts: 248
|
Quote:
Hey XJER 22X, I noticed you guys are running twin disc clutches. I recently got an Exedy twin disc clutch since I upgrade my power. All seems to run fine except the clutch. Whilst stationary, and my foot is off the clutch, the clutch makes this nasty rattling, scraping kinda sound. Is this normal cuz my garage/tuner say that with most twin disc clutches, especially Exedy ones, this is rather common. If not, would you know a solution? |
|
01-09-2013, 02:13 PM | #17 |
Drives: 2010 rs/ss black # 10,308 Join Date: Mar 2009
Location: hoffman estates, il
Posts: 914
|
Yup it is very common for twin and triple disc clutches. Depends on the brand though. My particular clutch does not do that and only chatters on occasional light take offs, nut is nothing to be worried about. It should get less noticeable over time.
sent from my galaxy s3. that would explain the errors.
__________________
|
01-09-2013, 02:37 PM | #18 |
|
Have you checked your slave cylinder? After I had my Street slayer twin disc installed I had the same problem. Installed a new slave cylinder and all was good. I have heard that the slave cylinders often leak.
|
01-09-2013, 04:03 PM | #19 |
Drives: 2010 rs/ss black # 10,308 Join Date: Mar 2009
Location: hoffman estates, il
Posts: 914
|
Were you able to find an aftermarket upgrade or did you go stock again?
sent from my galaxy s3. that would explain the errors.
__________________
|
04-29-2013, 11:08 PM | #20 |
WHPLSH
Drives: 2010 SS Maggie,ARH,Meth,AFE Coilove Join Date: Mar 2010
Location: San Clemente ,Ca
Posts: 128
|
I have the act 2 twin disc and its terrible ,and shudders like crazy in first .stay away from these clutches
|
04-30-2013, 07:17 AM | #21 |
|
|
04-30-2013, 08:45 AM | #22 |
Drives: 2011 2ss Join Date: Oct 2012
Location: United States
Posts: 272
|
Ram makes a good slave cylinder.
__________________
2011 2ss Ram twin plate ceramic clutch, Texas speed 418 LS3 235 /243 .621 / .624 cam, ported and polished heads with dual springs,magnum push rods, Hotchkis race pack, Stainless Power long tube headers with no cats, Magna Flo competition exhaust, lpe fuel pump, magnuson supercharger with overdrive and port matched blower plate, IW 8 rib pullies, AEM meth kit, id 850 injectors, 3 bar map, halltech cai, zl1 rear diff
|
|
|
|
|