The V6 Lounge - Page 712

J_Vibe92 · 08-21-2013, 03:24 PM

yeah they is a bunch of white stuff and some red orange stuff. when i was loosing them up i heard a huge crack. i thought i broke the bolt but i didnt. i guess that stuff stuck onto the block. how do i clean it. i ran it thrown soap and water and nothing really happened hahaha

well my friend is coming over with a small 10mm wrench. but wtf.... o much for me trying to be productive.

i think i may have effed up a bit here.

when you re RTV, i can just apply on the blue stuff right. no need to wash and what not

J_Vibe92 · 08-21-2013, 03:28 PM

Is a little bit of catch can oil okay for grease

pgustavson · 08-21-2013, 03:38 PM

Quote:

Originally Posted by J_Vibe92

yeah they is a bunch of white stuff and some red orange stuff. when i was loosing them up i heard a huge crack. i thought i broke the bolt but i didnt. i guess that stuff stuck onto the block. how do i clean it. i ran it thrown soap and water and nothing really happened hahaha

well my friend is coming over with a small 10mm wrench. but wtf.... o much for me trying to be productive.

i think i may have effed up a bit here.

when you re RTV, i can just apply on the blue stuff right. no need to wash and what not

Unless we're thinking of two different bolts, don't you need a 13mm???

You should remove any previously cured RTV from the isolator and heads. it'll probably peel right off w/o much effort.

As far as what the red/orange stuff is - I can't say for sure, but it could be thread locker compound. Usually one would clean it off with a wire brush. I take it that you didn't do the install?

pgustavson · 08-21-2013, 03:46 PM

Quote:

Originally Posted by J_Vibe92

Is a little bit of catch can oil okay for grease

I suppose it could be in a pinch.

You ought to have a close look at the threads in the heads after you get the intake manifold off to see if there is any debris down in the holes. Or more of the red/orange stuff. If so, you can attempt to clean them out using one of the bolts. Just run it in and out of each hole carefully until you get to the point that it's pretty easy to do by hand.

menendez1293 · 08-21-2013, 03:46 PM

Quote:

Originally Posted by J_Vibe92

Ok so I was taking my Intake manifold off to do some cleaning and while trying to put it on I think I'm screwed. I have the black ice and I dont have a took for the back bolt so I said damn and went to put it back on. The black ice dislodged from the manifold but I cant reseal it till I get a wrench. Also my bilts have all this white stuff and I am trying to torwie it back but keep getting cracking noises so I'm scared to continue. Fml. Should I clean the bolt so itll go down smooth?

I'm sorry but I didn't understand that.

jewel25 · 08-21-2013, 03:59 PM

Quote:

Originally Posted by menendez1293

I'm sorry but I didn't understand that.

It doesn't sound good.

FireCracker · 08-21-2013, 04:08 PM

Oh yeah.. there are other places to talk besides the game thread

Hi everyone!

Dtrimpi87 · 08-21-2013, 04:10 PM

Quote:

Originally Posted by FireCracker

Oh yeah.. there are other places to talk besides the game thread

Hi everyone!

Well, I'm out.

J_Vibe92 · 08-21-2013, 04:12 PM

all the thread on the bolts look great. its above it on the smooth aluminum part where it is coated with white and red stuff. ill take some pics soon to explain

kjkjr27 · 08-21-2013, 04:17 PM

Quote:

Originally Posted by FireCracker

Oh yeah.. there are other places to talk besides the game thread

Hi everyone!

Game is kinda boring right now....

But

FireCracker · 08-21-2013, 04:17 PM

Quote:

Originally Posted by Dtrimpi87

Well, I'm out.

Oh my gosh?? Really?? Stop being such a baby.

menendez1293 · 08-21-2013, 04:18 PM

Quote:

Originally Posted by Dtrimpi87

Well, I'm out.

The people who aren't posting at all are making me

FireCracker · 08-21-2013, 04:18 PM

NO TALKING ABOUT THE GAME

menendez1293 · 08-21-2013, 04:20 PM

Quote:

Originally Posted by FireCracker

NO TALKING ABOUT THE GAME

Your the one that started it

08-21-2013, 03:24 PM	#9955
J_Vibe92 Drives: 2013 Mustang 5.0 Join Date: Dec 2012 Location: Houston Posts: 1,788	yeah they is a bunch of white stuff and some red orange stuff. when i was loosing them up i heard a huge crack. i thought i broke the bolt but i didnt. i guess that stuff stuck onto the block. how do i clean it. i ran it thrown soap and water and nothing really happened hahaha well my friend is coming over with a small 10mm wrench. but wtf.... o much for me trying to be productive. i think i may have effed up a bit here. when you re RTV, i can just apply on the blue stuff right. no need to wash and what not __________________ Performance Mods: Vararam Intake, MRTv2.0 exhaust, Elite Engineering CC, Vmax Black Iceolator, Vmax Ported TB, OBX LT Headers w/ no CATS, LMR Tune Visual mods: Eagle Eyes w/5k hids, Custom Hood Spears, Heritage Grille, Stage 2 LED Dome lights,Transformer Emblems, PD Bezels, 19in Chevy rims with pirellis, Blue painted calipers, GM GFX Front Splitter, 35/20 % Tint, TailLight Tint(charcoal) 1/4 Mile: 13.65 sec @ 102.53 mph R.I.P.

08-21-2013, 03:28 PM	#9956
J_Vibe92 Drives: 2013 Mustang 5.0 Join Date: Dec 2012 Location: Houston Posts: 1,788	Is a little bit of catch can oil okay for grease __________________ Performance Mods: Vararam Intake, MRTv2.0 exhaust, Elite Engineering CC, Vmax Black Iceolator, Vmax Ported TB, OBX LT Headers w/ no CATS, LMR Tune Visual mods: Eagle Eyes w/5k hids, Custom Hood Spears, Heritage Grille, Stage 2 LED Dome lights,Transformer Emblems, PD Bezels, 19in Chevy rims with pirellis, Blue painted calipers, GM GFX Front Splitter, 35/20 % Tint, TailLight Tint(charcoal) 1/4 Mile: 13.65 sec @ 102.53 mph R.I.P.

08-21-2013, 04:12 PM	#9963
J_Vibe92 Drives: 2013 Mustang 5.0 Join Date: Dec 2012 Location: Houston Posts: 1,788	all the thread on the bolts look great. its above it on the smooth aluminum part where it is coated with white and red stuff. ill take some pics soon to explain __________________ Performance Mods: Vararam Intake, MRTv2.0 exhaust, Elite Engineering CC, Vmax Black Iceolator, Vmax Ported TB, OBX LT Headers w/ no CATS, LMR Tune Visual mods: Eagle Eyes w/5k hids, Custom Hood Spears, Heritage Grille, Stage 2 LED Dome lights,Transformer Emblems, PD Bezels, 19in Chevy rims with pirellis, Blue painted calipers, GM GFX Front Splitter, 35/20 % Tint, TailLight Tint(charcoal) 1/4 Mile: 13.65 sec @ 102.53 mph R.I.P.

08-21-2013, 04:08 PM	#9961
FireCracker Banned Drives: a car Join Date: Jan 2013 Location: not where i wanna be :) Posts: 2,114	Oh yeah.. there are other places to talk besides the game thread Hi everyone!

08-21-2013, 04:18 PM	#9967
FireCracker Banned Drives: a car Join Date: Jan 2013 Location: not where i wanna be :) Posts: 2,114	NO TALKING ABOUT THE GAME