Roto-Fab CAI for 2016 Camaro SS Sneak Peak! - Page 6

Roto-fab 1 · 06-01-2016, 02:44 PM

Quote:

Originally Posted by R3DLT1

I want another update! Lol
Any idea on price?

We are testing some other configurations today. The goal now is to keep all of our gains up high while increasing power on the low end.
I don't think we are allowed to post pricing in this section, but we expect it to be about the same as our ZL1 intake system.

laynlo15 · 06-01-2016, 08:40 PM

I think you can, all other have.

Roto-fab 1 · 06-02-2016, 05:17 PM

A few of you have asked about our system's ability to accept the factory sound enhancing tube. Here are a couple pictures from today in between data logging runs that show some major changes we have made, including:

-The addition of our polymer elbow molded with the ability to couple to your intake sound enhancing tube. The design looks nice and doesn't impede airflow.

-A completed MAF sensor housing.

[IMG]

[/IMG]

The MAF housing and elbow are complete in form, but lack the texture finish that our production intake will feature.

BradfordCamaro · 06-02-2016, 05:33 PM

Looks like it's coming along.
Too bad the elbow for the sound tube couldn't be on the side. Givebit a super clean look.

R3DLT1 · 06-02-2016, 09:58 PM

Was up with the dyno pics on ur photobucket.....

Roto-fab 1 · 06-03-2016, 01:04 PM

Quote:

Originally Posted by BradfordCamaro

Looks like it's coming along.
Too bad the elbow for the sound tube couldn't be on the side. Givebit a super clean look.

For those wanting a cleaner look, our sound enhancer delete kit will not only eliminate the fitting on the inlet elbow, but will also eliminate the "snorkel" tubing going back to the firewall. This may also aid in eliminating any unwanted or annoying intake sounds. That being said, our intake doesn't seem to have the annoying sounds which apparently accompany some other aftermarket intake systems.
We have tested our intake with the sound enhancer disconnected and it still has a throaty, powerful sound under acceleration.

Roto-fab 1 · 06-03-2016, 05:53 PM

Here are the hood closed dyno sheets from our most recent configuration. We are satisfied with the performance at higher RPMs. As previously stated, we are working on the mid range performance now. We expect even greater gains at higher RPMs when we dial in the mid range performance. This CAI system will be worth the wait! It is our sincere hope that Camaro owners will wait for and compare third-party testing before making a purchasing decision.

Thanks to JDP Motorsports for the valuable feedback on our system.

Blue line is Roto-fab, red line is stock air intake

Roto-fab gains 20+ HP over stock at higher RPMs

G6SS · 06-03-2016, 10:54 PM

Quote:

Originally Posted by Roto-fab 1

Here are the hood closed dyno sheets from our most recent configuration. We are satisfied with the performance at higher RPMs. As previously stated, we are working on the mid range performance now. We expect even greater gains at higher RPMs when we dial in the mid range performance. This CAI system will be worth the wait! It is our sincere hope that Camaro owners will wait for and compare third-party testing before making a purchasing decision.

Thanks to JDP Motorsports for the valuable feedback on our system.

Blue line is Roto-fab, red line is stock air intake

Roto-fab gains 20+ HP over stock at higher RPMs

Looking good! Not worried about peak hp but definitely more of a gain in the power band which looks good here! Update if you get any more news!

Blackdevil77 · 06-04-2016, 07:11 AM

That looks great to me! Slows down the drop off in the upper rpms. It's fantastic what better breathing can achieve. Great job!

R3DLT1 · 06-05-2016, 07:57 PM

Better be worth the wait. I literally found out today that my GF bought me the mishimoto CAI for father's day n told her to cancel the order. Lmao.

1hevy_chevy · 06-06-2016, 06:34 AM

Quote:

Originally Posted by R3DLT1

Better be worth the wait. I literally found out today that my GF bought me the mishimoto CAI for father's day n told her to cancel the order. Lmao.

Lmfaooooooooo you're waiting for the right one

Sent from my iPhone using Tapatalk

R3DLT1 · 06-06-2016, 07:47 AM

Quote:

Originally Posted by 1hevy_chevy

Lmfaooooooooo you're waiting for the right one

Sent from my iPhone using Tapatalk

Hey man that's what im saying.

jdasnt3 · 06-06-2016, 08:12 AM

Had one for my 15. Nice product.

JDP Motorsports · 06-06-2016, 04:41 PM

Quote:

Originally Posted by Roto-fab 1

Here are the hood closed dyno sheets from our most recent configuration. We are satisfied with the performance at higher RPMs. As previously stated, we are working on the mid range performance now. We expect even greater gains at higher RPMs when we dial in the mid range performance. This CAI system will be worth the wait! It is our sincere hope that Camaro owners will wait for and compare third-party testing before making a purchasing decision.

Thanks to JDP Motorsports for the valuable feedback on our system.

Blue line is Roto-fab, red line is stock air intake

Roto-fab gains 20+ HP over stock at higher RPMs

This is an outstanding system and it will be worth the wait. Roto-Fab takes a lot of pride in their products. They won't release it until it does exactly what they want it to and what Roto-Fab customers expect it to do! Stay tuned!!

Kind regards,

Jordan Priestley
801-545-4215

06-01-2016, 08:40 PM	#72
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,862	I think you can, all other have. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

06-02-2016, 05:17 PM	#73
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	A few of you have asked about our system's ability to accept the factory sound enhancing tube. Here are a couple pictures from today in between data logging runs that show some major changes we have made, including: -The addition of our polymer elbow molded with the ability to couple to your intake sound enhancing tube. The design looks nice and doesn't impede airflow. -A completed MAF sensor housing. [IMG][/IMG] The MAF housing and elbow are complete in form, but lack the texture finish that our production intake will feature.

06-02-2016, 05:33 PM	#74
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Looks like it's coming along. Too bad the elbow for the sound tube couldn't be on the side. Givebit a super clean look. __________________

06-02-2016, 09:58 PM	#75
R3DLT1 Toyota Tech Drives: 2SS A8 Join Date: Jul 2014 Location: Bartlesville, OK Posts: 465	Was up with the dyno pics on ur photobucket..... __________________ 2016 Camaro SS A8 Roto-Fab CAI: Drag set up 11.9 @116 Sold 95 Camaro Z28 Cam:Bolt ons: 12.3 @114 Sold 2013 Chevy Crzue LTX

06-05-2016, 07:57 PM	#80
R3DLT1 Toyota Tech Drives: 2SS A8 Join Date: Jul 2014 Location: Bartlesville, OK Posts: 465	Better be worth the wait. I literally found out today that my GF bought me the mishimoto CAI for father's day n told her to cancel the order. Lmao. __________________ 2016 Camaro SS A8 Roto-Fab CAI: Drag set up 11.9 @116 Sold 95 Camaro Z28 Cam:Bolt ons: 12.3 @114 Sold 2013 Chevy Crzue LTX

06-03-2016, 05:53 PM	#77
Roto-fab 1 Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009 Location: Arizona Posts: 2,682	Here are the hood closed dyno sheets from our most recent configuration. We are satisfied with the performance at higher RPMs. As previously stated, we are working on the mid range performance now. We expect even greater gains at higher RPMs when we dial in the mid range performance. This CAI system will be worth the wait! It is our sincere hope that Camaro owners will wait for and compare third-party testing before making a purchasing decision. Thanks to JDP Motorsports for the valuable feedback on our system. Blue line is Roto-fab, red line is stock air intake Roto-fab gains 20+ HP over stock at higher RPMs

06-04-2016, 07:11 AM	#79
Blackdevil77 Drives: 2008 Pontiac G8 GT, Shelby GT500 Join Date: Mar 2011 Location: Long Island, New York Posts: 1,376	That looks great to me! Slows down the drop off in the upper rpms. It's fantastic what better breathing can achieve. Great job!

06-06-2016, 08:12 AM	#83
jdasnt3 Drives: 18 Silverado 1500 Join Date: Dec 2015 Location: Bradenton, FL Posts: 1,721	Had one for my 15. Nice product. __________________ 16 Red Hot 2SS A8: NPP, CAI Cold air, Ported TB, Fasterproms Ported intake, E85 flex, Formatto tuned. 11.80@118 with 1.92 60' (600-700 DA) on stock run flats.

User Name		Remember Me?
Password