Firearms Section - Page 426

sycraft · 06-02-2014, 07:55 PM

A few more- Browning .22 from Belgium Classic), Ruger Mark II, Ruger SR40, and the POF P415 5.56...

Suppressor is next for the POF (Patriot Ordinance Factory)

Mikes fast ss · 06-02-2014, 08:06 PM

Just got my gun permit about s month ago. Up here in CT we can't have anything that "looks dangerous". That's actually how it's written. That and nothing more than a 10 round mag. This is my favorite buy out of the 5 guns I've gotten so far.

Dan Wesson Valor V-Bob:

Mikes fast ss · 06-02-2014, 08:07 PM

Quote:

Originally Posted by Mikes fast ss

Just got my gun permit about s month ago. Up here in CT we can't have anything that "looks dangerous". That's actually how it's written. That and nothing more than a 10 round mag. This is my favorite buy out of the 5 guns I've gotten so far.

Dan Wesson Valor V-Bob:

Another:

SGDM · 06-06-2014, 04:54 PM

Typical day at the range.

ChrisBlair · 06-06-2014, 08:34 PM

Well, today is D-Day, so:

ZaBeast07 · 06-13-2014, 06:51 PM

Anyone interested in a Winchester Mod 94, 26in Octagonal Barrel, 1905 build date??

PM Me

shank0668 · 06-16-2014, 01:42 PM

Anyone know anything about the Sig 556 DMR? I know people hated on them for their 1 in 10 twist barrel but they've changed to 1 in 8 it seems a couple years ago. I may pick one up.

CamaroKid300 · 06-16-2014, 02:25 PM

What's up guys...I'm back again haha

I just bought a PSA completed lower and now I'm looking for some upper assemblies.

Do you have any suggestions? I'd like to stay reasonably priced and also would like it to have a quad rail.

I'm assuming any upper will fit the PSA lower? Also, the lower comes with no magazines can someone give me a link to where I can buy some please? I don't really know if they are all the same or if they are different. Thanks

shank0668 · 06-16-2014, 03:03 PM

Quote:

Originally Posted by CamaroKid300

What's up guys...I'm back again haha

I just bought a PSA completed lower and now I'm looking for some upper assemblies.

Do you have any suggestions? I'd like to stay reasonably priced and also would like it to have a quad rail.

I'm assuming any upper will fit the PSA lower? Also, the lower comes with no magazines can someone give me a link to where I can buy some please? I don't really know if they are all the same or if they are different. Thanks

I'm guessing your lower is mil spec. Any upper that is also mil spec will work (well pretty much any upper will work) As far as mags, any ar15 mag will work. I have a pmag to match my moe plastics, and i have some used ones from the military. They all work.

In terms of an upper, I like a 1 in 7 twist chrome lined. You could go hammer forged, but it probably isn't necessary.

shank0668 · 06-16-2014, 03:10 PM

You could do this http://palmettostatearmory.com/index...ng-handle.html and change the handguard. If you want to stay affordable.
I'd go with an LMT or BCM bolt carrier group personally.
What is your price range for a complete upper?

CamaroKid300 · 06-16-2014, 05:52 PM

Quote:

Originally Posted by shank0668

I'm guessing your lower is mil spec. Any upper that is also mil spec will work (well pretty much any upper will work) As far as mags, any ar15 mag will work. I have a pmag to match my moe plastics, and i have some used ones from the military. They all work.

In terms of an upper, I like a 1 in 7 twist chrome lined. You could go hammer forged, but it probably isn't necessary.

This is the lower I bought. I was going to put one together but just decided instead of fooling with it and only saving $20-30 I'd go ahead and have it put together for me.

http://palmettostatearmory.com/index...-magazine.html

Quote:

Originally Posted by shank0668

You could do this http://palmettostatearmory.com/index...ng-handle.html and change the handguard. If you want to stay affordable.
I'd go with an LMT or BCM bolt carrier group personally.
What is your price range for a complete upper?

Ideally I'd like to spend no more than $400

How much do the BCG/charging handle normally run?

If I get a quad rail hand guard can I still attach a fore grip to that?

Ideally, I'd like to put on an eotech and have canted iron sights or something along those lines.

CamaroKid300 · 06-16-2014, 05:57 PM

I just answered some of my own questions.

BCG $100+

shank0668 · 06-16-2014, 07:27 PM

Quote:

Originally Posted by CamaroKid300

This is the lower I bought. I was going to put one together but just decided instead of fooling with it and only saving $20-30 I'd go ahead and have it put together for me.

http://palmettostatearmory.com/index...-magazine.html

Ideally I'd like to spend no more than $400

How much do the BCG/charging handle normally run?

If I get a quad rail hand guard can I still attach a fore grip to that?

Ideally, I'd like to put on an eotech and have canted iron sights or something along those lines.

What do you plan to attach to your hand guard? On a rail you can attach a fore grip.
I'd figure $150-200 into the BCG and CH.
You could look for a complete upper. Those quad rails are pricey it seems.

Russo · 06-16-2014, 08:18 PM

sycraft and dangerous, why a bi-pod on a 16"?

06-02-2014, 07:55 PM	#5951
sycraft COTW 5/06/2013 Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012 Location: Milford, Michigan Posts: 3,201 View My Garage	A few more- Browning .22 from Belgium Classic), Ruger Mark II, Ruger SR40, and the POF P415 5.56... Suppressor is next for the POF (Patriot Ordinance Factory) Attached Images __________________ 2017 Grand Sport, Borla X Pipe.....Enough Said

06-02-2014, 08:06 PM	#5952
Mikes fast ss Slowhawk Built Drives: 2010 Supercharged SS Join Date: Apr 2014 Location: CT Posts: 819	Just got my gun permit about s month ago. Up here in CT we can't have anything that "looks dangerous". That's actually how it's written. That and nothing more than a 10 round mag. This is my favorite buy out of the 5 guns I've gotten so far. Dan Wesson Valor V-Bob: Attached Images

06-06-2014, 04:54 PM	#5954
SGDM Drives: 2016 2SS Join Date: Nov 2011 Location: North Texas Posts: 1,422	Killer Egg Typical day at the range. Attached Images __________________ Who Dares...Wins

06-06-2014, 08:34 PM	#5955
ChrisBlair Buick 455 Fan Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010 Location: Boston MA Posts: 5,957	Well, today is D-Day, so: __________________

06-13-2014, 06:51 PM	#5956
ZaBeast07 Mid-Florida Camaro Club Drives: IPF SC'd 2010 LLT 2015 1SS/RS Join Date: Sep 2010 Location: Hunter's Creek, Florida Posts: 1,311 View My Garage	Anyone interested in a Winchester Mod 94, 26in Octagonal Barrel, 1905 build date?? PM Me __________________ My Build Thread My IPF S/C Build Thread 13.522@104.72---R/T .256---60' 2.008 www.MidFloridaCamaroClub.com

06-16-2014, 01:42 PM	#5957
shank0668 Drives: '14 LML/'06 LJ/'76 Trans Am Join Date: Feb 2008 Location: Ohio Posts: 8,438 View My Garage	Anyone know anything about the Sig 556 DMR? I know people hated on them for their 1 in 10 twist barrel but they've changed to 1 in 8 it seems a couple years ago. I may pick one up.

06-16-2014, 02:25 PM	#5958
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,143 View My Garage	What's up guys...I'm back again haha I just bought a PSA completed lower and now I'm looking for some upper assemblies. Do you have any suggestions? I'd like to stay reasonably priced and also would like it to have a quad rail. I'm assuming any upper will fit the PSA lower? Also, the lower comes with no magazines can someone give me a link to where I can buy some please? I don't really know if they are all the same or if they are different. Thanks __________________ Stock...For Now.

06-16-2014, 03:10 PM	#5960
shank0668 Drives: '14 LML/'06 LJ/'76 Trans Am Join Date: Feb 2008 Location: Ohio Posts: 8,438 View My Garage	You could do this http://palmettostatearmory.com/index...ng-handle.html and change the handguard. If you want to stay affordable. I'd go with an LMT or BCM bolt carrier group personally. What is your price range for a complete upper?

06-16-2014, 05:57 PM	#5962
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,143 View My Garage	I just answered some of my own questions. BCG $100+ __________________ Stock...For Now.

06-16-2014, 08:18 PM	#5964
Russo Unofficial Glass Tech Drives: 2014 Ford F150 FX2 Join Date: May 2009 Location: Raceland, LA Posts: 1,376	sycraft and dangerous, why a bi-pod on a 16"?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firearms section?	monstertodd	Site Related Announcements / Suggestions / Feedback / Questions	23	06-10-2010 09:32 PM
Removing Swirl Marks using a Flex and Meguiars M105/M205	Angelo@Autopia	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	5	05-22-2010 11:36 PM
The COPO of Today	The_Blur	5th Gen Camaro SS LS LT General Discussions	48	01-31-2010 08:00 PM
Laws Protecting Consumers for Aftermarket Parts	strauchpete	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	01-17-2010 09:31 AM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 12:37 PM