The V6 Lounge - Page 376

Lil' Nasty · 07-05-2013, 02:01 PM

Quote:

Originally Posted by lscamaro

What's up!

Does anyone know the measurements of the hoses of the catch can? I need to buy one

Guessing you need the length? I believe the diameter is like 3/8"

menendez1293 · 07-05-2013, 02:15 PM

Quote:

Originally Posted by lscamaro

What's up!

Does anyone know the measurements of the hoses of the catch can? I need to buy one

The hoses are 3/8 in diameter for the elite and Rx can and you should be good with 5-6 feet of lines to mount it on either the driver or passenger side. I think mine are about 5 feet total and I have it mounted on the engine cover stud with a god amount of slack in the lines.

Edit: the only thing you have to make sure is that the lines you buy are rated for petroleum based products.

lscamaro · 07-05-2013, 02:37 PM

Yes, length but thank you for the diameter. Didn't know that either lol. You guys think I'll be ok with 6 feet? I'm mounting mine on the drivers side where the cold air intake used to be.

menendez1293 · 07-05-2013, 02:42 PM

Quote:

Originally Posted by lscamaro

Yes, length but thank you for the diameter. Didn't know that either lol. You guys think I'll be ok with 6 feet? I'm mounting mine on the drivers side where the cold air intake used to be.

Honestly if it was me I would buy extra. The hoses aren't to much for a foot so I always like having left overs. You shouldn't need more than 8 feet for sure though

kjkjr27 · 07-05-2013, 02:42 PM

Quote:

Originally Posted by Wuiquen

Yeah.. I really hate dealing with the paiting part.. did u guys know ur Kevin installed the headers or no??

No haven't installed them yet might do it Monday idk...poppa dukes gave me $200 before I left to come back to my apartment so i may just put that towards the cost to install will call this one place i got referred to on Monday.

Today has been a super long day and it isn't even over yet..woke up at 7:30Am to pack to head back up to my place not 4 miles on my 180mile stretch some garbage truck decides to take out a toyota and flipped it on the roof in a ditch so highway got shut down for a good 30min. They clean it up and start towing the garbage truck and literally 1/4mile down the highway it catches fire and they shut it down again!

for another good 25min...what really sucked was I had to take a leak so bad I ended walking in this bush area right off the highway and went haha. And now it is time for a good 10hr work day woo...hoo....

Aubrey64 · 07-05-2013, 03:22 PM

Man, that does really suck! There is nothing worse then starting your morning off crappy, it just makes the rest of the day that much worse

kjkjr27 · 07-05-2013, 05:43 PM

Nailed it haha. Atleast tonight will be an easy (but very boring) work day/night.

Wuiquen · 07-05-2013, 09:07 PM

Well if its gonna be black.. then why dont u do it urself?.. I painted my front splitter, side skirts and rear quarters myself with flexible bper coating.. its simple..

Wuiquen · 07-05-2013, 09:08 PM

Was wondering if u already did... well I hope u get them installed.. tomorrow I get to fix my muffler.. will do a video before and after..

J_Vibe92 · 07-06-2013, 01:23 AM

-___- I made a 14.1 at 99.8 today with a DA of 2100

J_Vibe92 · 07-06-2013, 01:28 AM

I destroyed a heavily modded 12 v6. he ran a 14.9

I also beat a z28 pretty decently. everyone was running slow. DA corrected I ran a 13.7

Aubrey64 · 07-06-2013, 01:48 AM

Nice!

menendez1293 · 07-06-2013, 11:54 AM

What's up guys?

kjkjr27 · 07-06-2013, 11:55 AM

Quote:

Originally Posted by menendez1293

What's up guys?

Not much just the usual (bored at work), you?

07-05-2013, 02:37 PM	#5253
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Yes, length but thank you for the diameter. Didn't know that either lol. You guys think I'll be ok with 6 feet? I'm mounting mine on the drivers side where the cold air intake used to be. __________________ Click Picture for Build Thread

07-05-2013, 03:22 PM	#5256
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,684	Man, that does really suck! There is nothing worse then starting your morning off crappy, it just makes the rest of the day that much worse __________________

07-05-2013, 05:43 PM	#5257
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Nailed it haha. Atleast tonight will be an easy (but very boring) work day/night. __________________ Twitch Youtube

07-05-2013, 09:07 PM	#5258
Wuiquen Drives: 2018 Hot Red ZL1 Join Date: Nov 2010 Location: Los Angeles, CA Posts: 3,616	Well if its gonna be black.. then why dont u do it urself?.. I painted my front splitter, side skirts and rear quarters myself with flexible bper coating.. its simple.. __________________

07-05-2013, 09:08 PM	#5259
Wuiquen Drives: 2018 Hot Red ZL1 Join Date: Nov 2010 Location: Los Angeles, CA Posts: 3,616	Was wondering if u already did... well I hope u get them installed.. tomorrow I get to fix my muffler.. will do a video before and after.. __________________

07-06-2013, 01:23 AM	#5260
J_Vibe92 Drives: 2013 Mustang 5.0 Join Date: Dec 2012 Location: Houston Posts: 1,788	-___- I made a 14.1 at 99.8 today with a DA of 2100 __________________ Performance Mods: Vararam Intake, MRTv2.0 exhaust, Elite Engineering CC, Vmax Black Iceolator, Vmax Ported TB, OBX LT Headers w/ no CATS, LMR Tune Visual mods: Eagle Eyes w/5k hids, Custom Hood Spears, Heritage Grille, Stage 2 LED Dome lights,Transformer Emblems, PD Bezels, 19in Chevy rims with pirellis, Blue painted calipers, GM GFX Front Splitter, 35/20 % Tint, TailLight Tint(charcoal) 1/4 Mile: 13.65 sec @ 102.53 mph R.I.P.

07-06-2013, 01:28 AM	#5261
J_Vibe92 Drives: 2013 Mustang 5.0 Join Date: Dec 2012 Location: Houston Posts: 1,788	I destroyed a heavily modded 12 v6. he ran a 14.9 I also beat a z28 pretty decently. everyone was running slow. DA corrected I ran a 13.7 __________________ Performance Mods: Vararam Intake, MRTv2.0 exhaust, Elite Engineering CC, Vmax Black Iceolator, Vmax Ported TB, OBX LT Headers w/ no CATS, LMR Tune Visual mods: Eagle Eyes w/5k hids, Custom Hood Spears, Heritage Grille, Stage 2 LED Dome lights,Transformer Emblems, PD Bezels, 19in Chevy rims with pirellis, Blue painted calipers, GM GFX Front Splitter, 35/20 % Tint, TailLight Tint(charcoal) 1/4 Mile: 13.65 sec @ 102.53 mph R.I.P.

07-06-2013, 01:48 AM	#5262
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,684	Nice! __________________

07-06-2013, 11:54 AM	#5263
menendez1293 Emerald Coast Camaros Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009 Location: Tallahassee FL Posts: 9,686 View My Garage	What's up guys?