ZL1 Wheel Options - Show me your setups - Page 9

Mac7504 · 03-28-2022, 10:25 PM

Quote:

Originally Posted by arpad_m

They do sell some sweet looking wheels indeed. One more thing I noticed is that their website is a very professional, confidence inspiring piece of work, so I have no problem believing you about their products (that I have no personal experience with). Still too expensive for me, though

Expensive for sure. I'd much rather put that money towards the engine for this cae but it still tempts me.

Camaro1973 · 03-28-2022, 10:53 PM

Here’s mine.

Savini SV-F3

TXCSSU · 03-28-2022, 11:41 PM

Quote:

Originally Posted by arpad_m

They do sell some sweet looking wheels indeed. One more thing I noticed is that their website is a very professional, confidence inspiring piece of work, so I have no problem believing you about their products (that I have no personal experience with). Still too expensive for me, though

Maybe one day, if you save up enough... Oh wait I'm starting to sound like a vendor....

Z OH 6 · 03-29-2022, 03:58 AM

Vossen HF-05

arpad_m · 03-29-2022, 09:16 AM

Quote:

Originally Posted by TXCSSU

Maybe one day, if you save up enough... Oh wait I'm starting to sound like a vendor....

Heh, I've yet to see a better wheel design than the SS 1LE. It's just perfect, plus it matches the car's lines in every way. Even if I had a ZL1, I'd put these same wheels on. I'm slow to get bored by perfect designs anyway, takes me several years

But, when the time comes, I'll hit up your shop that you'll sure have opened by then

gpskinzhut · 03-29-2022, 10:13 AM

Quote:

Originally Posted by arpad_m

Heh, I've yet to see a better wheel design than the SS 1LE. It's just perfect, plus it matches the car's lines in every way. Even if I had a ZL1, I'd put these same wheels on. I'm slow to get bored by perfect designs anyway, takes me several years

They are a really nice design, along with the ZLE wheels. Wish MRR didn't drop the M716 or I'd have grabbed another set. My only gripe with the 1LE wheels is I wish the offset was a little more aggressive.

JSH · 03-29-2022, 10:28 AM

My wheels

TXCSSU · 03-29-2022, 11:48 AM

Quote:

Originally Posted by arpad_m

Heh, I've yet to see a better wheel design than the SS 1LE. It's just perfect, plus it matches the car's lines in every way. Even if I had a ZL1, I'd put these same wheels on. I'm slow to get bored by perfect designs anyway, takes me several years

But, when the time comes, I'll hit up your shop that you'll sure have opened by then

Seems that there are always one or two vendors on every site that are a bit shady. On the GTO forums there was a guy that was selling "car polishes" that he claimed he created. I think someone claimed that he was just mixing polishes/waxes from different brands and selling them at a markup. Someone went so far as to expose his fake degree at a school that he was never enrolled in.

But as for the wheels, while the looks are important I would go with the ugliest "my-little-pony" wheels if they were really cheap carbon fiber. I also figure the OEM on my ZL1 are fine, so the only upgrade I'd be looking at is for carbon fiber. I understand they run between $5K and $10K at the moment, so I think I'll stick to the OEMs for now.

ST1LE · 03-29-2022, 11:55 AM

Quote:

Originally Posted by JSH

My wheels

Good choice. I think I will got this direction if not Apex ARC-8s.

infinitereality · 03-29-2022, 02:13 PM

Quote:

Originally Posted by arpad_m

Heh, I've yet to see a better wheel design than the SS 1LE. It's just perfect, plus it matches the car's lines in every way. Even if I had a ZL1, I'd put these same wheels on. I'm slow to get bored by perfect designs anyway, takes me several years

Totally agree!

gpskinzhut · 03-29-2022, 03:38 PM

Quote:

Originally Posted by infinitereality

Totally agree!

What size spacers did you end up running on this to get them flush to the fender? I briefly recall skimming your original post.

Mac7504 · 03-29-2022, 03:45 PM

Quote:

Originally Posted by infinitereality

Totally agree!

Those suckers do look nice

Z OH 6 · 03-29-2022, 03:45 PM

Quote:

Originally Posted by arpad_m

Heh, I've yet to see a better wheel design than the SS 1LE. It's just perfect, plus it matches the car's lines in every way. Even if I had a ZL1, I'd put these same wheels on. I'm slow to get bored by perfect designs anyway, takes me several years

But, when the time comes, I'll hit up your shop that you'll sure have opened by then

I don't know about better than any other but they do look good, the problem is that there are no custom offsets or widths. You get standard OEM offset and width and that's it.

zxspeedspec · 03-29-2022, 04:00 PM

My new wheels show up in about a week so...

03-28-2022, 10:53 PM	#114
Camaro1973 Drives: 2019 ZL1 Join Date: Mar 2019 Location: NJ Posts: 1,534	Here’s mine. Savini SV-F3 Attached Images __________________ 928rwhp - 93 \| 1040rwhp/898rwrq - E65 SAE LME 377 LT4 Short Block \| Magnuson 2650 80mm upper w/13% lower (9.06) \| DSX Lid & Valve Covers \| CSP Custom Cam w/32% fuel lobe \| CID Heads \| NW 103mm TB \| Roto Fab Big Gulp \| CSP 2" Headers w/Green GESI Gen 2 Cats \| Borla 3" Full Cat Back w/ S-Type\| Mighty Mouse Wild Catch Can\| Custom Holley Low side Fuel system\| TooHigh PSI Port Injection w/Holley Controller \| Forced Inductions Interchiller w/2 gallon fender tank \| TK Performance built 10L90

03-29-2022, 10:28 AM	#119
JSH Drives: '20 ZLE Join Date: Jun 2020 Location: Mile High Posts: 3,593	My wheels Attached Images __________________ '20 ZL1 1LE A10. LME 390, E2650, FBO, 100 oct. Not a DD.

03-29-2022, 03:58 AM	#116
Z OH 6 Drives: 2021 Red Hot ZL1 Join Date: Sep 2020 Location: GA Posts: 3,173	Vossen HF-05

03-29-2022, 04:00 PM	#126
zxspeedspec Banned Drives: Faster than yours Join Date: Nov 2021 Location: Earth Posts: 288	My new wheels show up in about a week so...

User Name		Remember Me?
Password