The V6 Lounge - Page 381

Wuiquen · 07-07-2013, 06:55 PM

Quote:

Originally Posted by Monchy36

That sounds really good!!! I like it a lot!!!

PS: Your car looks awesome! Very nicely done!

Thank you.. I tried getting new videos today but made only one...tried to make one going from stop into a freeway but my wheels were spinning and the camera flew off to the back of the car

Aubrey64 · 07-07-2013, 10:28 PM

So today I worked on my carbon fiber for close to 4 hours, and after at least 5 failed attempts, these parts are finally turning out

I'm pretty excited about it!

kjkjr27 · 07-07-2013, 10:32 PM

Just looks like a giant mess haha! BTW nice bike.

Aubrey64 · 07-07-2013, 10:38 PM

Quote:

Originally Posted by kjkjr27

Just looks like a giant mess haha! BTW nice bike.

haha I know, my dad says I have until Saturday to finish, and then I have to clean everything up. Thanks!

kjkjr27 · 07-07-2013, 10:57 PM

I wish I was into the whole CF thing but ehh it's not for me.

menendez1293 · 07-07-2013, 11:03 PM

Just saw your CF thread and have to say its coming along pretty well. Looks to be pretty difficult though. Honestly I don't think I'm gonna touch my interior I kind of have always liked it the way it came.

Aubrey64 · 07-07-2013, 11:03 PM

Some people like it and some people don't, I used to dislike it but the more I saw it the more I began to really love it. So I thought I would give wrapping a try

Aubrey64 · 07-07-2013, 11:24 PM

Quote:

Originally Posted by menendez1293

Just saw your CF thread and have to say its coming along pretty well. Looks to be pretty difficult though. Honestly I don't think I'm gonna touch my interior I kind of have always liked it the way it came.

Thanks! It is a pretty big pain in the ass to be honest, it is without a doubt harder then I expected it to be. But a company quoted me $300 for the A/C vent bezel in carbon fiber, so I figured that I may as well give it a try and see if I can get the job done for less. Since there was no way I was paying $300 for that.

kjkjr27 · 07-07-2013, 11:27 PM

Dang, I think I woulda just bought CF wrap and done it that way haha.

lscamaro · 07-08-2013, 12:55 AM

Was about to go to the track today and it was rained out

sucks

lscamaro · 07-08-2013, 12:55 AM

Quote:

Originally Posted by Aubrey64

Thanks! It is a pretty big pain in the ass to be honest, it is without a doubt harder then I expected it to be. But a company quoted me $300 for the A/C vent bezel in carbon fiber, so I figured that I may as well give it a try and see if I can get the job done for less. Since there was no way I was paying $300 for that.

I want to try to do things in cf too but it does look hard. It'll look amazing when done though

Lil' Nasty · 07-08-2013, 01:41 AM

Quote:

Originally Posted by lscamaro

Was about to go to the track today and it was rained out

sucks

Was gonna detail my car but then it rained

Went and saw monsters university instead lol

Monchy36 · 07-08-2013, 06:00 AM

Quote:

Originally Posted by Lil' Nasty

Was gonna detail my car but then it rained

Went and saw monsters university instead lol

I Start detailing my car and rains!!!

OH wait! I have a garage...

mikeyg36 · 07-08-2013, 06:51 AM

07-07-2013, 10:28 PM	#5322
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,684	So today I worked on my carbon fiber for close to 4 hours, and after at least 5 failed attempts, these parts are finally turning out I'm pretty excited about it! Attached Images __________________

07-07-2013, 10:32 PM	#5323
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Just looks like a giant mess haha! BTW nice bike. __________________ Twitch Youtube

07-07-2013, 10:57 PM	#5325
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	I wish I was into the whole CF thing but ehh it's not for me. __________________ Twitch Youtube

07-07-2013, 11:03 PM	#5327
Aubrey64 Drives: 2010 Camaro LLT/RS Join Date: Apr 2012 Location: Plano, TX Posts: 2,684	Some people like it and some people don't, I used to dislike it but the more I saw it the more I began to really love it. So I thought I would give wrapping a try __________________

07-07-2013, 11:27 PM	#5329
kjkjr27 COTW 9/16/13 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 10,089	Dang, I think I woulda just bought CF wrap and done it that way haha. __________________ Twitch Youtube

07-07-2013, 11:03 PM	#5326
menendez1293 Emerald Coast Camaros Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009 Location: Tallahassee FL Posts: 9,686 View My Garage	Just saw your CF thread and have to say its coming along pretty well. Looks to be pretty difficult though. Honestly I don't think I'm gonna touch my interior I kind of have always liked it the way it came.

07-08-2013, 12:55 AM	#5330
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Was about to go to the track today and it was rained out sucks __________________ Click Picture for Build Thread

07-08-2013, 06:51 AM	#5334
mikeyg36 Drives: 2015 Z/28 #533 Join Date: Jul 2012 Location: NY Posts: 6,732