Quote:
Originally Posted by Andred1971
OK, so I figured it out. #3 bolt is not on the 2010 camaro. But the instructions I used also didnt say to remove the cover from the pillar air bags and to remove the 2 bolts holding in the passenger side airbag (also disconnect the wire for the airbag). Now I'm done the disassembly, and very nervously cut a whole in my dash. I'm read to put it back together, however I am stopped for I didn't get the wire from the HUD that goes down to the 4 guage pack. Grrrrr
I took lots of pics, so if you need some help/advice, shoot me a line.
|
I wouldn't mind the pics.
Going to pick up my new dash this Sat.