Chevrolet Corvette Stingray C7 Forum - View Single Post

CKeigans · 03-19-2020, 08:53 PM

So I bought a set of staggered wheel, fronts being 20x10 wrapped in 285/35r20s, rears being 20x12 wrapped in 305/35r20s. The rears fit just fine but the fronts have an issue where the TPMS sensor hits the steering knuckle, I thought I’d be able to limp it home, about 1 1/2 miles, but it tore the valve stem on the sensor. How will I be able to replace the valve stem in such a way to avoid future issues? I’m currently at stock height, not sure if lowering would help or not. Thanks for the input.

Sent from my iPhone using Tapatalk

03-19-2020, 08:53 PM	#1
CKeigans Drives: 2015 Chevy Camaro LT Join Date: Sep 2019 Location: Georgia Posts: 5	Need help fitting wheels! So I bought a set of staggered wheel, fronts being 20x10 wrapped in 285/35r20s, rears being 20x12 wrapped in 305/35r20s. The rears fit just fine but the fronts have an issue where the TPMS sensor hits the steering knuckle, I thought I’d be able to limp it home, about 1 1/2 miles, but it tore the valve stem on the sensor. How will I be able to replace the valve stem in such a way to avoid future issues? I’m currently at stock height, not sure if lowering would help or not. Thanks for the input. Sent from my iPhone using Tapatalk