List of parts to do the mod, we are done with install and will post up pics in the next week at most.
Head unit there are 2 one with nave and one with out, they fit all model year camaro's.
__________________________________________________ ______
Nav unit #22992934
Non Nav unit # 22965237
__________________________________________________ ____________
Face plate's, there are 4 in all but we will only post the ones with seat heaters, fits all model year cars.
__________________________________________________ ____________
Nav part #22919385
__________________________________________________ ___________
See below, no Nav button but we where told it will work with the non Nav face plate on a Nav headunit, we did not try that at this time will in some time.
Non Nav part # 22919384
__________________________________________________ ____________
As you know the Onstar box has changed from the 2010 cars, they had the Bluetooth antenna on the unit and now its in the head units, The programer thinks he can make it work i will send my old one to him to see if it can be done, so for now this is a needed unit.
__________________________________________________ ____________
Onstar part #22903686
__________________________________________________ __________
See only one antenna gos in the back, not 3 like the old cars, the old cars are 2010 and 11, in 12 we think the went down to 2 connectors, if any one knows that will help, we know the shark fin went down to 2 wires.
__________________________________________________ ____________
Next up is the new antenna, It is needed in all 2010-11 cars, the AC Delco site said the same part # was good for the 2012 cars as the 13&14 cars.
If you know let us know, we now on a convert its the same as the 13-14 convert.
__________________________________________________ ____________
Part #22869931
This is for the cope, let use know what car you have and we will get you the right part#
The black one is the right one ,the one with 3 wires is the 2010 and the one with only 1 wire is the Nav only for ero.
__________________________________________________ ___________
Per "DWALEX" the cars with sunroof us this antenna #22739134
And he said yous this # 92237379 for coups, we used the # 22869931 and simply moved the end from the old antenna to use in the new one.
I want to thank "DWALEX" for all he has done to help in this and a lot more Mods, he is a help to this community.
and here is what it looks like after.
__________________________________________________ ___________
And now to the harness and cables you will need.
Most you can get from the web but some you know will be from some on on here.
__________________________________________________ ___________
first up is the splitter #20960972
__________________________________________________ ____________
Next is the new harness that goes in the back of the radio, its the X4 connecter, its all made with JST parts, this is your video in and more.
This was made using shielded cable same as OEM.
__________________________________________________
This goes to the Onstar box to replace the auxiliary port wires that no longer come out of the PDIM, before the PDIM got the signal from the auxiliary port and USB and put the info on the low speed buss, now that we dont have a stand alone PDIM this how its done.
Then as you see one set has a video input so that is where your camara goes in, for 2012 cars one more harness is needed to get the video from the back of the car.
last set goes in the back of the face plate connecter it is your touch controls.
__________________________________________________ ___________
This is the only wire that is not PNP its 1 wire to go from the back of the large radio connecter to the face plate connecter, on the face plat it goes in there and then t-taps to #43 pin on the large radio connector.
__________________________________________________ ___________
__________________________________________________ ___________
Now for the center console, here is it old and new harness, the new one is on the console as you can see its missing the 2 connecters that went in to the PDIM.
__________________________________________________ ____________
And the part # for the right one.
__________________________________________________ ____________
Next the GM antenna wires needed.
__________________________________________________ ____________
Now if you want to by the GM ones "DWALEX" was nice to post the # for the 2 kits GM sales, and here they are, #13581173, 13581174.
I am not going to sale them that way, there are only the 3 needed, There only "FAKRA Cable Assemblies" and you only need them if your going to get the NAV unit, if you want the non NAV you dont need any of them.
__________________________________________________ ____________
Now for the new wire from the face plat to the back of the radio.
__________________________________________________ ____________
__________________________________________________ ____________
One last thing a USB cabal from the center console to the back of the radio.
No pic on this as i forgot to take one.