I did mine last weekend, you can just undo the screws in the hatch area(4) and along the door (3)plus the fuel door on drivers side (3) and tug it back along the top. Reach inside and undo the three nuts, swap, reinstall.
The only scary thing is if the installer got sloppy with the windows, the adhesive runs down onto the fender at the top edge. If that happens you have to work wedges into the sides of the fenders and break the sealant bonding the fender to the window edge. This was on the passenger side for me and the noises it makes is disconcerting to say the least...but totally worth it!
Good luck!
|