View Single Post
Old 11-21-2013, 11:14 PM   #7
Erik@lashway
 
Erik@lashway's Avatar
 
Drives: Camaros, Vettes, Trucks
Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 941
Hello everyone. I figured I would chime in and shed some light on our kit, it's progression since its debut, and some technical aspects of it.

We started developing this kit and choosing its specific components long before our C7 showed up at our door. Our choice to go with a COMP "Oiless" turbo was a no brainer. Most folks are scared to drill and tap an oil pan, or to run a stand alone oiling system for their turbocharger so we took the guesswork out there. These turbos are proven, they work, and are completely re-buildable and serviceable, so we thought we would utilize this turbocharger on our kit.

Honestly, we're not looking to take over the market here - just build and offer something fun! STS is also developing their own twin kit I believe, and I know for a fact that other, larger performance shops will eventually produce and sell mid and front mount kits which we're excited about.

We wanted to show the performance world that we are a main stay in this business, and that we can build top notch products just like any of the other leaders in our industry...and that's what we did.

As of today, I have driven the Vette over 500 miles without a single issue. Our first and main priority is fit, finish, and the overall ruggedness of the kit. Bumps, potholes, sharp turns, 7000 RPM pulls...you name it, we're putting the car and the kit through it.

We currently are limiting boost almost completely until we can clear some space on the dyno to begin the tuning process.

Fuel - it is true that fueling presents some difficulty with any power adders on these vehicles. However, our tuner and the software that we utilize, along with our knowledge and expertise in forced induction will help us to solve this bottleneck. We are not worried in the least about fueling. It'll be a matter of how we do it, not if.

The kit can produce over 750 RWHP as it sits right now. We based that calculation off of the turbo size, piping size, intercooler capacity, and of course tuning capability available.

We do not have the budget to try and blow this engine up right away, nor is that our intention. We want to build and sell a kit that will add 100-150 RWHP RELIABLY, and something that someone can install themselves in their home garage.

Our initial power goal will be 550 rwhp. Then we will go from there and see what happens.

Thanks!
Lashway

PS---Anyone who thinks strapping on a 150 shot of spray and making big numbers is the same as building a one off blower or turbo kit, you need to check your brain. We sprayed our car with a Nitrous Express kit the first week we had the car. It's badass for sure and is brutally effective, but nothing, and I mean NOTHING compares to this.
Erik@lashway is offline   Reply With Quote