Chevrolet Corvette Stingray C7 Forum - View Single Post - This Isn't Exactly a Camaro Issue, But....

hurricane87 · 08-28-2017, 01:43 PM

My wife has the Cadillac SRX with the same 3.6 as the base Camaro. The coils are held down by a 10mm bolt that goes in a metal collar that rests in the composite head.

One of these collars no longer rests, and just spins when I try to tighten the bolt. Is there an epoxy (or any other method) that works to hold these collars in place after they've come loose?

Thanks in advance.

08-28-2017, 01:43 PM	#1
hurricane87 Drives: 2009 SRX Join Date: Aug 2017 Location: Brevard County, FL Posts: 4	This Isn't Exactly a Camaro Issue, But.... My wife has the Cadillac SRX with the same 3.6 as the base Camaro. The coils are held down by a 10mm bolt that goes in a metal collar that rests in the composite head. One of these collars no longer rests, and just spins when I try to tighten the bolt. Is there an epoxy (or any other method) that works to hold these collars in place after they've come loose? Thanks in advance.