CAMARO6 - View Single Post

WhyUMad1LE · 02-15-2017, 01:00 PM

***UPDATE 12/27/21***

My setup: https://www.camaro6.com/forums/showt...8#post11113148

***UPDATE 3/30/21***

To clarify, the information below pertains to 2017 & 2018 model years. 2019 and newer switched to a different CAN bus protocol (GM-LAN).

***UPDATE 1/21/19***

There is no external amplifier in the 1SS 1LE. It has a chip amp integrated into the HMI which is located under the glovebox. You can see the location at 6m24s in this video (although the Camaro in video is not a 1SS 1LE, all 6th gens have HMI mounted in the same location):

To grab the signal digitally without amplifying the system chimes, we can use the NAV-TV M650 ($850), PAC AP4-GM61 ($200~$400), and Axxess AX-DSP/AX-DSP-X with AX-DSP-GMLAN09 harness (~$400).

FYI radio using the PAC will be mono and not stereo. The AX-DSP will lower the driverside speaker volume when chimes turn on. AFAIK no one has tried the NAV-TV on a non-Bose system.

If you have a line out converter you would like to use and don't care about loud chimes, you can try this harness: https://lljcustoms.com/store?olsPage...-amp-t-harness
*******************

ORIGINAL POST:

I want to hook up a different amp to the stock speakers. I see there is a subth ump harness but we have the MRC module where an amp is supposed to be? Anyone know where it's located?

Should look like this:

02-15-2017, 01:00 PM	#1
WhyUMad1LE Drives: 17 SS 1LE Join Date: Dec 2015 Location: Houston Posts: 1,920	Amp Location In 1LE? *UPDATE 12/27/21* My setup: https://www.camaro6.com/forums/showt...8#post11113148 *UPDATE 3/30/21* To clarify, the information below pertains to 2017 & 2018 model years. 2019 and newer switched to a different CAN bus protocol (GM-LAN). *UPDATE 1/21/19* There is no external amplifier in the 1SS 1LE. It has a chip amp integrated into the HMI which is located under the glovebox. You can see the location at 6m24s in this video (although the Camaro in video is not a 1SS 1LE, all 6th gens have HMI mounted in the same location): To grab the signal digitally without amplifying the system chimes, we can use the NAV-TV M650 ($850), PAC AP4-GM61 ($200~$400), and Axxess AX-DSP/AX-DSP-X with AX-DSP-GMLAN09 harness (~$400). FYI radio using the PAC will be mono and not stereo. The AX-DSP will lower the driverside speaker volume when chimes turn on. AFAIK no one has tried the NAV-TV on a non-Bose system. If you have a line out converter you would like to use and don't care about loud chimes, you can try this harness: https://lljcustoms.com/store?olsPage...-amp-t-harness ******************* ORIGINAL POST: I want to hook up a different amp to the stock speakers. I see there is a subth ump harness but we have the MRC module where an amp is supposed to be? Anyone know where it's located? Should look like this: Attached Images Last edited by WhyUMad1LE; 12-27-2021 at 12:24 PM.